插头电源线综合测试机（又叫电源线综合测试机，插头综合测试机）符合[1] IEC/EN60884-1, IEC/EN 60320-1, IEC/EN60799, EN50075, DINVDE0620-1, DINVDE 0625-1, BS1363, B 546, BS4573, BS4491, NFC61-314-2010, SEV1011:09, SEV6533, SEV6534, SI32, CEI23-50，UL498, UL817-2011, CSAC22.2，GB1002, GB2099, GB17465, GB15934, JISC8303, JISC8306, CNS10917:1985, CNS690, IS1293, KSC8305, TIS166-2549, GOSTR51322.1, MS589, SS145-1997, SS472, SB107-2-D1,CS0017:2003, CS0052-1:2006, TCVN6188，TCVN 6190，TCVN6610，NBR14136, NBR6147, AS/NZS3112-2012, AS/NZS 3109.1, IRAM2063, IRAM2073, SABS164-1, SABS60799, SB107-2-D1，PNS35等标准要求
Power Cord Comprehensive Tester (Cord Sets Comprehensive Tester，Power Plug Integrated Tester, Multiple Socket-outlet Tester) is designed and manufactured in compliance with IEC/EN60884-1, 60320-1, 60799, EN50075, DIN VDE 0620-1, 0625-1, BS 1363-1, 546, 4573, 4491-1, SEV 1011, SEV 6533, 6534, SI 32, CEI 23-50，UL498, UL817, CSA C22.2，GB1002, 2099.1, 17465.1, 15934, JIS C8303, 8306, CNS 10917-2, IS 1293, KS C8305, TIS 166-2549, GOST R51322.1, MS 589, SS145/A, 472, SB107-2-D1 , CS 0017, NBR14136, 6147, AS/NZS 3112, 3109.1, IRAM 2063, 2073, SABS 164-1, 60799, etc. And suitable for electrical testing items of power cord with connector and without connector, 2 core wire and 3 core wire and so on.
RH-102D 30工位触摸式人机界面综合测试机(双头30工位）西思特
RH-102D 30工位触摸式人机界面综合测试机(双头30工位）西思特图册
测试项目 
　   插头电源线综合测试机适用于单头、双头(多头)、两芯、三芯插头电源线测试(也可依客户要求设计多芯测试机)。内置耐压机，内外高压分别独立可调,主控电路采用进口微电脑PLC可编程逻辑控制系统。可进行导通、极性、长度、绝缘电阻、极间高压、极外高压等项目测试。合格品由顶针顶出且在插头上打上测试合格标记（如需要“T”标记，订购需说明）防止漏检或混入不合格品；不合格品有声光报警且不能顶出，还可选装不合格品自动剪切刀<订购需说明>。随着技术升级创新，多个型号产品实现人机对话触摸屏微电脑控制，内嵌不同测试模式及参数，只有权限人员才能更改参数，测试更方便、安全可靠。
 特点
       本着安全、可靠、稳定、效率、创新的开发和制造理念，本司产品外观美观，布局合理，中英文对照操作方便，核心部件全系进口（PLC可编程逻辑控制器, 接触器Contactor、继电器Relay、气缸Cylinder，人机对话Man-machine conversation等），其它部件采用国内外大厂，同时积极参考电业公司的意见，设计更人性化和实用方便。 西思特插头综合测试机是被全球知名公司（如HP，Dell, Sony等）认可的四家专业厂家之一，且是中国{wy}一家。也是国内{wy}xx能被镒胜(I-Sheng)、良维(Longwell)、怡富万(Linetek)、豪利士(Volex)、领亚(Linoya)、正威(Awin)、周氏(Chau's)、博硕(ASAP)、富士康(Foxconn)等知名电业公司认可的专业厂家，更是众多电业公司{sx}和认证机构（UL,VDE, CCC, BSI等）推荐的专业厂家。 　　
RH-101电源线综合测试机(用于单头测试）西思特
RH-102B 30工位综合测试机(双头30工位）西思特 　　
RH-102D 30工位触摸式人机界面综合测试机(双头30工位）西思特 　　
RH-103 双头单工位综合测试机(用于双头测试，其它型号RH-103C/RH-103D） 　　
RH-104双头单工位综合测试机(用于双头测试，ASAT/BSI专用）西思特 　　
RH-105 30工位综合测试机(双头30工位，ASAT/BSI专用）西思特 　　
RH-108 30工位综合测试机(双头30工位）西思特 　　
RH-109 单头单工位综合测试机(用于单头测试）
 技术规范 
技术规范Technical Specification 
主要技术指标Main Technical Data 
此为通用版规格书，各型号略有差异。 
This is the general version of specification, the various models differ slightly. 
1.输入电源Input Power：220VAC±10%，50Hz/60Hz, 5A 
2.接入气压Air pressure：约4kgf/cm3, About 4kgf/cm3 
3.主控制系统Master control system：可编程逻辑控制系统，人机对话触摸屏微电脑控制（依机型According to types）。PLC and the man-machine dialogue touch screen microcomputer control. 
4.测试类型Test the power cord types：单头(双头)2P有/无极性、单头(双头)3P有极性,或依要求设计多芯测试机。Can test with/without polarity plugs and connectors (1 P, 1 P + 1 P (1S  
or 1C), 1P + N P), Can also defer to the customer request design. 
5.测试项目Test Items：导通（断路、短路）、极性、相对长度、绝缘电阻、极间高压、极外高压、漏电流（接地电阻等可定制）。Polarity & Continuity test, Insulation Resistance, Interpolar Hi-pot & Skin Hi-pot, Leakage Current, Relative Length (grounding Resistance and so on can be customizable). 
6.测试模式Test modes：脚踏开关控制，或插线自动测试。 
The pedals switch control or insert the test sample for automatic test. 
测试顺序Test sequence：极性、导通(断路/短路)、绝缘、内高压、外高压。 
Polarity, Continuity (open and short circuit),Insulation Resistance, Interpolar Hi-pot & Skin Hi-pot.
7.导通，极性测试Continuity &Polarity test 
测试原理Test principle： 
a、感应式： 感应式测试线材长度Inductive test wire length≥10pF 
b、回路式： 极性点击有声光讯号指示，错位有声光报警提示，需按复位键停止。Loop modes: polarity click give out sound and light signals instructions, dislocation has audio and light alarm prompt, need to press the reset button to stop. 
测试结果类型Test result modes: 
a、导通不合格，百分表不能达到合格点,声光报警。Continuity is NG, indicator can't achieve qualified point, give out sound and light alarm. 
b、其他不合格，自动锁模且有声光报警提示，需手动复位。The other is NG, automatic locking and has sound and light alarm prompt, need to manually reset button. 
合格/不良品自动计数，合格自动开模顶出打印合格标记。Qualified products and unqualified automatically counting, passed automatic unlocking push out and print qualified marks. 
8. 高压测试Hi-pot Test : 
a. 输出电压Interpolar Hi-pot: 0～5KV连续可调Continuous adjustable (According to types). 
b. 内输出高压漏电流Interpolar Hi-pot leakage current: 依机型0.5、1.0、2.0、3.0、5.0mA选择或0.5～10mA连续可调。According to the modes choose 0.5, 1.0, 2.0, 3.0, 5.0mA or 0.5～10mA (According to  types) continuous adjustable. 
c. 外输出电压Skin Hi-pot: 0～6KV连续可调Continuous adjustable (According to type). 
d. 外输出高压漏电流Skin Hi-pot leakage current: 依机型0.5、1.0、2.0、3.0、5.0mA选择或0.5～10mA连续可调。According to the modes choose 0.5, 1.0, 2.0, 3.0, 5.0mA or 0.5～10mA (According to types)  continuous adjustable. 
e. 额定功率Rated power: 200～750VA (According to types). 
f. 波形Waveform: 50/60Hz，交流正弦波AC sine wave. 
g.电压校准Voltage calibration: ±5%  
h.开关Switch: 零电平转换Zero-level conversion 
i.测试时间Test time: 数字显示，预置式，内外高压可任意设定。Digital display, preset modes, inside and outside Hi-pot can be arbitrarily set. 
j.高压指示表Hi-pot pressure indicator:  
比例Proportion 1:50 
级别Class: 1.5 Class 
k.判断精度Judgment precision: ±3% 现在设定值Present setting values. 
l.高压失败判断Hi-pot fail judgment: 判断Judging *测量值比基准值大Measured value larger than t he basic value; 
*切断输出电压给出失败信号The cut-off output voltage and give out the fail signal. 
m.漏电流设定值Leakage current value : 依机型0.5、1.0、2.0、3.0、5.0mA选择或0.5～10mA连续可调。According 
to the modes choose 0.5, 1.0, 2.0, 3.0, 5.0mA or 0.5～10mA (According to types)   continuous adjustable. 
n.判断xx度Judgment precision ±3% 现在设定值Present setting values. 
o.校准Calibration 纯电阻负载串联RMS,真值表测试。Pure resistance loading series connection RMS, true value table  
test. 
10. 绝缘电阻Insulation resistance 
输出电压Output voltage: 500V DC 
电压校准Voltage calibration : ±5% 
基准值设定Reference value setting: 5 MΩ/100MΩ，可定制Customizable. 
判断Judging: 被测物测量值比设定基准值小，给出失败IN信号。Measured value smaller than the basic value and give out the fail signal. 
判断xx度Judgment precision: ±5% 
指示表Indicator:（0～100 MΩ）±5% 
测量范围Measurement range: 0～∞ 
绝缘测试体Insulation testing body: 导电海棉conductive sponge. 
相对长度Relative length: 线材感应度Wire sensitivity,  
感应式测试线材长度。Inductive test wire length≥10pF. 
11.顶针thimble: 测试合格标记Test qualified marks, 分冷顶出和加热顶出，温度可设定，打印测试合格标记。Has ordinary push out and heats up push out two modes, the temperature can be set, print a test qualified marks. 
12.计数功能Tally function 
自动计数器Automatic counter: 合格品、不良品自动计数。Qualified products and unqualified automatically counting. 
13.安全防护 Safety protection 
触电防护Electric shock protection 地线接地保护，保障人身安全,本机器已加装，自行接地即可。 
The earth grounding protection, safeguards the personal safety， 
The machine has installed, only need grounding. 
14.尺寸Size 
机身尺寸Machine size, 依各型号According to types. 
15.其它Other 
特别要求或选配Special requirements or Optional 
a、可据客户需求安装不良品自动破坏切刀；Can be install unqualified automatic destroying cutting knife.
b、可依客户需求选配不同类型插头，连接器测试插座; According to demand choose a variety of plug and connector test special socket。西思特www.cestr 
c、可依客户需求加装其它功能。Other functions can be custom installed.