关键词:紫外激光光束分析仪,紫外激光光束质量分析仪,紫外光束分析仪,紫外光束质量分析仪
日前,德国Cinogy公司推出了其{zx1}开发的UV-Converter,这款UV-Converter采用C-Mount接口设计。可以非常方便安装在Cinogy公司CinCam系列光束质量分析仪上,以实现对紫外波段激光器的光束分析与时时监测。UV-Converter工作波段可覆盖100nm到500nm的宽阔范围,从而使CinCam系列光束分析仪实现从100nm到1100nm广阔测量范围。是准分子激光器、266nm、355nm等紫外波段激光器光束分析的必备工具之一。
Technology: |
Fluorescence crystal |
Thickness: |
0.5mm |
Active area: |
(a): 6.4 x 4.8 mm2 (b): 9.6 x 7.2
mm2 |
Spectral
response: |
110nm - 532nm |
Fluorescent decay
time: |
Depending on the crystal
(0,5μs-3ms) |
Resolution: |
5μm - 10μm |
Dynamic range: |
> 5 orders of
magnitude |
Max. input
intensity: |
1.5W/cm2 |
Max. energy
density: |
500mJ/cm2 |
Max. average
power: |
15W |
Crystal
stability: |
>107 pulses |
CCD-1201 |
CCD-1301 |
CCD-2301 |
CCD-2302 |
|
SENSOR DATA |
|
|
|
|
Format: |
1/2” |
1/3” |
2/3” |
2/3” |
Active area: |
6.5mm x 4.8mm |
4.8mm x 3.6mm |
9.0mm x 6.7mm |
8.5mm x 7.1mm |
Number of pixel: |
1388 x 1038 (1.4MPixel) |
1292 x 964 (1.2MPixel) |
1388 x 1038 (1.4MPixel) |
2452 x 2056 (5MPixel) |
Pixel size: |
4.65μm x 4.65μm |
3.75μm x 3.75μm |
6.45μm x 6.45μm |
3.45μm x 3.45μm |
Spectral response without cover glass: |
350nm - 1100nm |
350nm - 1100nm |
350nm - 1100nm |
350nm - 1100nm |
Laser beam diameter (1/e2) min / max: |
46.5μm / 4mm |
37.5μm / 3mm |
64.5μm / 5mm |
34.5μm / 5.5mm |
Sensor cooling: |
passive |
|
passive |
|
CAMERA FEATURES |
|
|
|
|
Lens Mount: |
C-Mount |
C-Mount |
C-Mount |
C-Mount |
Bit depth (Output): |
14Bit |
14Bit |
14Bit |
14Bit |
Dynamic (Signal to noise): |
60dB (1:1000) |
59dB (1:900) |
67dB (1:2200) |
54dB (1:500) |
Frame rate: |
up to 15Hz |
up to 30Hz |
up to 16Hz |
up to 9Hz |
Exposure time: |
100μs-1s |
|
100μs-1s |
|
Interface: |
FireWire (IEEE1394b) |
FireWire (IEEE1394b) |
FireWire (IEEE1394b) |
FireWire (IEEE1394b) |
I / O connector: |
12-Pin Hirose |
12-Pin Hirose |
12-Pin Hirose |
12-Pin Hirose |
Mode: |
cw or pulsed |
cw or pulsed |
cw or pulsed |
cw or pulsed |
Trigger: |
TTL-signal |
|
TTL-signal |
|
Combinable with: |
IR- / UV-Converter Beam expander Attenuator |
Microscope lens Beam expander Attenuator |
Beam expander Attenuator |
Beam expander Attenuator |
SPECIFICATIONS |
|
|
|
|
Mechanical dimensions (W x H x L): |
60mm x 60mm x 103.8mm |
60mm x 60mm x 103.8mm |
60mm x 60mm x 103.8mm |
60mm x 60mm x 103.8mm |
Weight: |
300g |
|
300g |
|
Electrical requirements: |
DC 8V-36V |
DC 8V-36V |
DC 8V-36V |
DC 8V-36V |
Storage temperature*: |
-10°C…+60°C |
-10°C…+60°C |
|
|
Operating temperature*: |
+5°C…+45°C |
|
+5°C…+45°C |
|
Regulations: |
CE, RoHS |
CE, RoHS |
CE, RoHS |
CE, RoHS |
=德国Cinogy公司
已投稿到: |
|
---|