产品简介： 

本通用型电源适配器输出功率为65W.可适用于不同厂商，不同型号的多款笔记本电脑和数码产品，其中包括Samsung，Sony，Toshiba，Acer，BenQ，Lenovo，Compaq，DELL，HP，IBM和其他众多品牌。此款适配器输出电压可从4.2V到24V，根据客户需要做其中任意9个电压。用到先进的工业级MCU控制输出电压，电压之间的转换只需要一个轻触按键实现。并带有8个可以简易更换的DC插头，和一个国际通用{wn}插座。在不同的国家用在不同品牌不同型号的笔记本和数码设备上，仅需要参照笔记本和数码设备的输入要求调整电压和更换匹配的DC插头即可。

配件：5个手机接头；9个DC头，经大量实验测试比市面上通用的8个接头套装适用性更广。

参数说明：

型    号：TDE-303  AD65S

输入电压：AC90-AC264V  50／60Hz

输出功率：65W

输出电压： 5V，8.4V，9.5V，12V，15V，16V，18V，18.5V，19V，19.5V，20V，22V，24V(可根据客户要求定制9种常用输出)

体    积：106mm×45mm×26mm （124.020 CM³）

效    率：≥85%

纹    波：≤100mv

过压保护：有

功率保护：有

短路保护：有                                 

温度保护：有

AD65S设计工艺

1、          本适配器设计符合便携小巧的设计理念；

2、          符合智能化标准，采用先进的微电脑控制器来实现电压的调节；

3、          符合环保和低功耗要求；

4、          符合通用标准，不但电压可以调节而且DC头可以更换。

5、          符合安规等要求。

AD65S生产工艺

1、          ROHS测试标准：铅（Pb）、汞(Hg)、六价铬(Cr6+)、多溴联苯(PBB)、多溴二苯醚(PBDE)的{zd0}允许含量为0.1%(1000ppm)，镉(cd)为0.01%(100ppm)

2、          高压测试标准：初级和次级之间的绝缘大于3500V/3S

3、          负载能力测试：每台机的负载能力为65W到70W

4、          过载保护，短路保护，过压保护测试：要求每台机超过峰值功率（70W）时，短路时，过压时，都会自动保护

5、          跌落测试：要求从1m高处自由下落后不开裂能正常工作

6、          老化测试：在经过24小时的高压（220V）和低压(110V)老化后，不过温度，不溶胶壳，工作正常

主要优势:

1、          体积小巧。（124.020 CM³）现在大多65W单电压输出适配器体积一般都在130mm*55mm*35mm    (250.250CM³)左右，而多电压输出的都在140mm*60mm*37mm  (310.8CM³ )左右。

2、          输出电压范围宽。输出可以从4.2V-24V。市面上的电压可调适配器一般为12V-24V，并且由于机械滑动开关的限制最多只能做其中5个电压输出，而此款适配器用到了MCU(微电脑控制器)控制，使输出电压增多,根据体积一般可以做到7个到15个之间。

3、          用到先进的工业级MCU控制。除了使输出电压的范围增加外还使电源实现了智能控制。摆脱了机械开关5档电压限制的困难。

4、          控制软件可以升级。工业级的MCU不但抗干扰能力强而且控制软件可以升级，为适应以后电源的智能化准备。

5、          操作更简单、安全。一般电压可调适配器都是用机械的滑动开关通过左右拨动开关来调节输出电压，这样导致在调节输出电压时由于机械开关的触点之间打火容易使适配器损坏而且操作起来也不是很简单。相对于这些，我们的适配器用到MCU调节电压，避免了机械的直接接触，安全更有保证。其次，操作方便，不需要你拨动只要通过一个轻触按键便可实现每个电压的自动转换。

附各电压支持数码产品图示：

INTRODUCTION:

Output power for this universal power adapter is 65W which is suitable for different factories,different models of laptops,digital products,including Samsung,Sony,Toshiba,Acer,BenQ,

Lenovo,Compaq,Dell,HP,IBM as well as other brands.

The Output Voltage for this type adapter can be adjusted from 4.2V to 24V.We can make 9 arbitrary voltages from 4.2V to 24V according to customer’s demand.Adopt advanced industrial grade MCU to control output voltage which make voltage switching feasible just by a key.You can convert the voltage by a key,which is controled by MCU.Attachment includes 8 DC plugs and one international universal socket.You can use different brands &models of laptops and digital equipments in different countries,just refer to input demand of laptop and digital equipments to adjust voltage&replace suitable DC plug accordingly.

Accessories:5 mobile phone connectors,9 DC connectors which are more applicable than  Universal 8 pieces of connectors in the market by lots of experiment test

Prameter description:

1.Model:TDE-303 AD65S

2.Output voltage:AC90-AC264V  50/60Hz

3.Output power:65W

4.Output voltage: 4.2V,5V,8.4V,9.5V,12V,15V,16V,18V,18.5V,19V,19.5V,20V,22V,24V(9 types common output voltage are customerized)

5.Volume: 106mm×45mm×26mm （124.020 CM³）

Effeciency:≥85%

Ripple : ≤100mv

Overvoltage protection:  yes

Power protection:  yes

Short circuit protection; yes

Temperature protection: yes

AD65S design technology:

1. This adapter design accord with design concept of portable and small
2. In line with intelligentized standard, adopt advanced micro-computer controller to adjust voltage
3. Accord with enviromental protection and low power consumption
4. Accord with universal standard, adjustable voltages, alternative DC connectors
5. Accord with safty regulation etc requirements

AD65S Production technoloty:

1.ROHS testing standard:Maximum Pb,Hg, Cr6+,PBB,PBDE≤0.1%(1000ppm), cd is 0.01%(100ppm)

2.high voltage testing standard:Insulation between primary and secondary is more than 3500V/3S.

3. Load capacity test:65W to 70W for each set

4.Overload protection,short circuit protection,overvoltage protection test:When each set reach max power(70W),short circuit,overvoltage,it will be protected automatically.

5.Fall test: It can work normally without split  fall freely after it falling from 1meter up.

6.Aging test: It can work normally without melting the cover after 24hours high voltage(220V)and low voltage(1100V) aging

Main advantages:

1. Small&exquisite volume:（124.020 CM³）.

At present,Volume for most of 65W single output voltage adpter is at 130mm*55mm*35mm    (250.250CM³) approximately.For multi-output voltage adapter ,the volume is at 140mm*60mm*37mm  (310.8CM³ ) approximately

1. Wide scope for output voltage:output voltage from 4.2V to 24V.Adjustabe voltage adapter in the market are from 12V-24V generally.Due to limitation of machinery slide switch,they can only make 5 output voltages from 12V-24V.While this type of adapter adopt MCU(micro-computer controller) control,in this way,output voltages are increased ,7 to 15 voltages can be made according to volume.
2. Adopt advanced industrial MCU control:in addtion to increased voltages range also made power achieve intelligent control. Get rid of difficulty of Mechanical switch 5 files voltage limitation.
3. control software can be upgrade.Industrial grade MCU has a strong capacity of resisting disturbance,what’s more,control software can be upgrade which is prepared for adapting to power intelligentize.
4. Simple & safty operation:

Adjsutable voltage adapter generally are adjusted output voltage by sliding switching mechanically through stirring switch right and left,which leads to adapter dameged easily and not easy in operation because of striking a light between contacts of mechanical switch  when adjust output voltage .Compared with these characters,our adapter adopt MCU to adjust voltage,which can avoid mechanical touch directly,safety is better assured.Secondly,easy operation: voltage can be transformed automatically by pressing a key-press.

联系方式：周生

TEL：    13926509723

QQ:         925888965

E-MAIL: 

内贸网址：
官方网站：
外贸网址：