有需要南非机动车标准的朋友，可以联系我：QQ: 59590038或直接发邮件给我niloul@163.com

1 SANS 1-1 The development of national standards and other normative documents
   国家标准及其它标准文件的发展
2 SANS 1-2 Requirements for the recognition of Standards Development Organizations (SDOs) in South Africa
   南非标准制定组织的认知要求
3 SANS 2 Lead-acid starter batteries
   铅酸启动电瓶
4 SANS 205 Road vehicles—Elastomeric cups and seals for hydraulic brake actuating cylinders using a non-petroleum base hydraulic brake fluid (service temperature70 ℃ max.)
   道路车辆—使用非石油基液压制动液的液压制动动力气缸的弹性压力封盖和密封件({zg}工作温度70 ℃)
5 SANS 206 Road vehicles – Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120℃ max.)
   道路车辆—使用非石油基制动液的液压盘式制动动力气缸的弹性压力封盖和密封件({zg}工作温度120 ℃)
6 SANS 311 Category L motor vehicles
   L类机动车
7 SANS 342 Automotive diesel fuel
   机动车柴油
8 SANS 465 Standard specification for denatured fuel ethanol for blending with gasolines for use as automotive spark-ignition engine fuel
   点火式发动机汽油混合用的改性乙醇燃料标准规格
9 SANS 476 Industrial trucks –Overhead guards –Specification and testing
   工业用卡车–顶罩的规范与测试
10 SANS 477 Powered industrial trucks and tractors –Brake performance and component strength
   机动工业用卡车和牵引车制动性能和零件强度
11 SANS 478 Vehicle lifts
   汽车举重机
12 SANS 513 Retro-reflectors (reflex reflectors)
   回复反射器
13 SANS 1046 Lights and light-signalling devices installed on motor vehicles and trailers
   机动车和挂车的灯光及光信号装置
14 SANS 1047 Interior fittings (passenger cars)
   内饰物(乘用车)
15 SANS 1051-1 Braking — Part 1: General
   制动—总论
16 SANS 1051-2 Braking — Part 2: Response time of braking devices on vehicles fitted with compressed-air braking devices
   制动—压缩空气制动装置的制动响应时间
17 SANS 1051-3 Braking — Part 3: Energy sources and reservoirs
   制动—动力来源及其储能装置
18 SANS 1051-4 Braking — Part 4: Spring brakes
   制动—弹簧制动
19 SANS 1051-5 Braking — Part 5: Parking brakes: Mechanically locked brake cylinder (lock actuator) type
   制动—驻车制动: 机械制动器类型
20 SANS 1051-6 Braking — Part 6: Distribution of braking effort and compatibility of vehicles in combination
   制动—制动力的分配及其与车辆的兼容性
21 SANS 1055 Motor vehicle safety: Rear underrun protection devices
   机动车安全: 后下防护装置
22 SANS 1080 Restraining devices (safety belts) for occupants of adult build in motor vehicles (Revised requirements)
   机动车成年乘员人保护装置（安全带）
23 SANS 1116-1 Retro-reflective number plates for motor vehicles — Part 1: Blanks (metal)
   机动车回复反射牌照—金属空白板
24 SANS 1116-2 Retro-reflective number plates for motor vehicles — Part 2: Metal
   机动车回复反射牌照—金属
25 SANS 1116-3 Retro-reflective number plates for motor vehicles — Part 3: Blanks (plastics)
   机动车回复反射牌照—塑料空白板
26 SANS 1116-4 Retro-reflective number plates for motor vehicles — Part 4: Plastics
   机动车回复反射牌照—塑料
27 SANS 1151 Portable rechargeable fire extinguishers — Halogenated hydrocarbon type extinguishers
   手提式可再充灭火器—卤化烃灭火器
28 SANS 1191 Safety glass for vehicles — High penetration-resistant laminated safety glass for vehicles
   安全玻璃—车辆高防穿透性夹层安全玻璃
29 SANS 1192 Laminated safety glass for vehicles
   车辆夹层安全玻璃
30 SANS 1193 Toughened safety glass for vehicles
   车辆钢化安全玻璃
31 SANS 12072 Braking
   制动
32 SANS 1208 Cast light alloy road wheels
   轻质合金铸车轮
33 SANS 1248 Devices to prevent the unauthorized use of motor vehicles (antitheft devices)
   防止盗用机动车辆的装置
34 SANS 1251 Engine cooling system protector
   发动机冷却系统防护装置
35 SANS 1269 Motor vehicle safety: Head restraints (passenger cars)
   机动车安全: 头枕(乘用车)
36 SANS 1322 Portable, non-refillable fire extinguishers (general purpose type)
   手提式一次性灭火器(一般目的型)
37 SANS 1327 Electrical connectors for towing and towed vehicles (7-pole connectors)
   牵引车和挂车的电连接器(7极)
38 SANS 1329-1 Retro-reflective and fluorescent warning signs for road vehicles — Part 1: Triangles
   道路车辆回复反射器和荧光警告标志:三角警告牌
39 SANS 1329-2 Retro-reflective and fluorescent warning signs for road vehicles — Part 2: Abnormal load vehicle signs
   道路车辆回复反射器和荧光警告标志:非正常货物运输车辆标识
40 SANS 1329-3 Retro-reflective and fluorescent warning signs for road vehicles — Part 3: Signs other than triangles, chevron signs and abnormal load vehicle signs
   道路车辆回复反射器和荧光警告标志:除三角警告牌和异形货物运输车辆标识的标识
41 SANS 1329-4 Retro-reflective and fluorescent warning signs for road vehicles — Part 4: Retro-reflective chevron signs
   道路车辆回复反射器和荧光警告标志: V型回复反射标志
42 SANS 1329-5 Retro-reflective and fluorescent warning signs for road vehicles — Part 5: Retro-reflective chevron decals
   道路车辆回复反射器和荧光警告标志:V型回复反射贴纸
43 SANS 1376-1 Lights for motor vehicles — Part 1: Incandescent lamps
   白炽灯
44 SANS 1376-2 Lights for motor vehicles — Part 2: Headlights
   前照灯
45 SANS 1376-3 Lights for motor vehicles — Part 3: Secondary lights
   辅助灯
46 SANS 1428 Replacement silencing systems for motor vehicles
   机动车备用消声系统
47 SANS 1429 Strength of seats and of their anchorages
   座椅及其固定点强度
48 SANS 1430 Anchorages for restraining devices
   保护装置固定点
49 SANS 1436 The rear-view mirrors of motor vehicles
   后视镜
50 SANS 1439 Automotive upholstery fabrics
   汽车内饰面料
51 SANS 1440 The steering mechanism of motor vehicles (Category M1 only): Behaviour on impact
   转向系统(xxM1): 碰撞性能
52 SANS 1441 Speedometer equipment on motor vehicles
   机动车车速表
53 SANS 1443 Door latches and hinges
   门锁门铰链
54 SANS 1447-1 Braking (motor and towed vehicles, designed for low speed or for use off public roads) — Part 1: Low speed vehicles
   低速或非道路用机动车、挂车的制动:低速车辆
55 SANS 1447-2 Braking (motor and towed vehicles, designed for low speed or for use off public roads) — Part 2: Low speed trailers
   低速或非道路用机动车、挂车的制动:低速拖车
56 SANS 1468 Roll-over protection structures for wheeled agricultural or forestry tractors (static testing)
   农用车和林用车翻滚防护装置(静态测试)
57 SANS 1472 Plastics safety glazing materials for motor vehicles
   机动车塑料安全玻璃
58 SANS 1477-1 Pneumatic braking system connections between drawing and
   drawn vehicles — Part 1: Contact type couplings
   拖车和挂车充气制动系统连接: 接触式连接器
59 SANS 1477-2 Pneumatic braking system connections between drawing and
   drawn vehicles — Part 2: Palm type couplings
   拖车和挂车充气制动系统连接: 钳式连接器
60 SANS 1477-3 Pneumatic braking system connections between drawing and drawn vehicles — Part 3: The arrangement of connections on vehicles, using contact type or palm type couplings
   拖车和挂车充气制动系统连接: 接触式、钳式连接器布置
61 SANS 1496 Wheel flaps fitted to motor vehicles
   机动车辆轮翼
62 SANS 1505-1 Ball type couplings and towing brackets for towing caravans and light trailers — Part 1: Towing brackets and integrated towing devices
   旅行挂车和轻型挂车用球型连接器和拖车支架: 拖车支架和一体式式拖车设备
63 SANS 1505-2 Ball type couplings and towing brackets for towing caravans and light trailers — Part 2: Coupling balls and ball supports
   旅行挂车和轻型挂车用球型连接器和拖车支架: 连接球和球面支座
64 SANS 1505-3 Ball type couplings and towing brackets for towing caravans and light trailers — Part 3: Coupling sockets
   旅行挂车和轻型挂车用球型连接器和拖车支架: 连接插座
65 SANS 1516 High performance engine lubricating oil for petrol engines (for API Service Category SJ)
   汽油发动机润滑油性能(美国石油学会SJ标准)
66 SANS 1517 High performance engine lubricating oil for diesel engines (for API Service Category CH-4)
   柴油发动机润滑油性能(美国石油学会CH-4标准)
67 SANS 15186 Transport of dangerous goods — Design requirements for road vehicles and portable tanks
   危险物品运输—道路车辆设计要求和可移动式罐柜
68 SANS 1519-1 Road signs — Part 1: Retro-reflective sheeting material
   道路标志—回复反射器薄片材料
69 SANS 1519-2 Road signs — Part 2: Performance requirements for road signs
   道路标志—道路标志要求
70 SANS 1550-1 Motor vehicle tyres and rims — Dimensions and loads — Part 1: General
   机动车轮胎和轮毂—尺寸和负荷—总论
71 SANS 1550-2 Motor vehicle tyres and rims — Dimensions and loads — Part 2: Passenger car tyres
   机动车轮胎和轮毂—尺寸和负荷—乘用车轮胎
72 SANS 1550-3 Motor vehicle tyres and rims — Dimensions and loads — Part 3: Commercial vehicle tyres
   机动车轮胎和轮毂—尺寸和负荷—商用车轮胎
73 SANS 1550-4 Motor vehicle tyres and rims — Dimensions and loads — Part 4: Motorcycle and scooter tyres
   机动车轮胎和轮毂—尺寸和负荷—摩托车和脚踏车轮胎
74 SANS 1550-5 Motor vehicle tyres and rims — Dimensions and loads — Part 5: Off-the-road vehicle tyres
   机动车轮胎和轮毂—尺寸和负荷—越野车轮胎
75 SANS 1550-6 Motor vehicle tyres and rims — Dimensions and loads — Part 6: Agricultural vehicle tyres
   机动车轮胎和轮毂—尺寸和负荷—农用车轮胎
76 SANS 1550-7 Motor vehicle tyres and rims — Dimensions and loads — Part 7: Industrial vehicle tyres
   机动车轮胎和轮毂—尺寸和负荷—工业用车轮胎
77 SANS 1550-10 Motor vehicle tyres and rims — Dimensions and loads — Part 10: Rim contours
   机动车轮胎和轮毂—尺寸和负荷—轮毂规格
78 SANS 1552 On-board computers for road transport
   车载电脑
79 SANS 1558 Tachograph recording equipment installed in road transport (excluding on-board computers)
   车辆转速计(除车载电脑)
80 SANS 1563 The strength of large passenger vehicle superstructures (rollover protection)
   大客车上部结构强度: 翻滚保护
81 SANS 1564 The strength of seats (and their anchorages) of large passenger buses
   大客车座椅及其固定点强度
82 SANS 1565 Pneumatic tyres for passenger cars and trailers
   乘用车和拖车充气轮胎
83 SANS 1566 Pneumatic tyres for commercial vehicles and trailers
   商用车和挂车充气轮胎
84 SANS 1577 Temporary-use spare wheels/tyres
   备用车轮/胎
85 SANS 1587 Protection equipment for the front of motor vehicles
   机动车前防护装置
86 SANS 1589 The braking performance of trackless underground mining vehicles — Load haul dumpers and dump trucks
   地下无轨煤矿工作车制动性能—铲运机和自卸式卡车
87 SANS 1598 Unleaded petrol
   无铅汽油
88 SANS 1622 New replacement brake drums for motor vehicles
   备用机动车制动鼓
89 SANS 1670 Warning lights
   警告信号灯
90 SANS 1708 Safety aspects of canopies as fitted to category N1 and N2 motor vehicles
   N1和 N2类车顶棚安全性能
91 SANS 1851 Lubricating grease
   润滑脂
92 SANS 1905 Hydraulic brake and clutch fluid (DOT 4 equivalent)
   液压制动和离合器用液体
93 SANS 1910 Portable refillable fire extinguishers
   手提式可充灭火器
94 SANS 1925 National modifications to SANS 20109: "Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for commercial vehicles and their trailers"
   关于商用车和拖车用翻新气压轮胎的生产的统一规定SANS 20109的修订
95 SANS 1935 Automotive biodiesel fuel
   汽车生物燃料
96 SANS 3779 Road vehicles — Vehicle identification number (VIN) — Content and structure
   车辆VIN码——编码内容和结构
97 SANS 3780 Road vehicles — World manufacturer identifier (WMI) code
   世界制造商代码
98 SANS 3894 Road vehicles — Wheels/rims for commercial vehicles — Test methods
   商用车轮胎/轮毂—测试方法
99 SANS 4030 Road vehicles — Vehicle identification number (VIN) — Location and attachment
   VIN码—位置与分布
100 SANS 4091 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Definitions, tests and requirements
   拖车的电连接器—定义, 测试和要求
101 SANS 4928 Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.)
   道路车辆—使用非石油基液压制动液的液压制动动力气缸的弹性压力封盖和密封件({zg}工作温度120 ℃)
102 SANS 4930 Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 °C max.)
   道路车辆—使用非石油基液压制动液的液压盘式制动动力气缸的弹性压力封盖和密封件({zg}工作温度150 ℃)
103 SANS 10013-1 The determination of performance (at net power) of internal combustion engines — Part 1: Road vehicle internal combustion engines at sea level
   内燃机净功率性能检测—低海拔状况下的内燃机
104 SANS 10013-2 The determination of performance (at net power) of internal combustion engines — Part 2: Compression ignition engines at altitude
   内燃机净功率性能检测—高海拔状况下的压燃式发动机
105 SANS 10013-3 The determination of performance (at net power) of internal combustion engines — Part 3: Agricultural vehicle internal combustion engines at sea level
   内燃机净功率性能检测—低海拔状况下的农用车内燃烧发动机
106 SANS 10047 The testing of motor vehicles for roadworthiness
   道路车辆道路行驶性能测试
107 SANS 10083 The measurement and assessment of occupational noise for hearing conservation purposes
   工作噪音工作环境下中听觉保护的检测与评估
108 SANS 10159 Measurement and calibration systems
   测试和校正系统
109 SANS 10168 The installation of restraining devices (safety belts) in motor vehicles
   机动车保护装置（安全带）的安装
110 SANS 10169 Determining the performance of audible warning devices (hooters) after installation in a motor vehicle
   机动车声音警告装置（汽笛）性能
111 SANS 10181 The measurement of noise emitted by road vehicles when stationary
   机动车辆静止时的噪音
112 SANS 10205 The measurement of noise emitted by motor vehicles in motion
   机动车辆行驶时的噪音
113 SANS 10211 The measurement of noise inside motor vehicles
   机动车内部噪音测试
114 SANS 10216 Vehicle test station evaluation
   车辆实验室评估
115 SANS 10219-1 The determination of performance (at net power) of industrial internal combustion engines — Part 1: Standard reference conditions and declarations of power, fuel consumption and lubricating oil consumption
   工业用内燃机性能检测—标准工况，标称功率,燃油油耗和润滑油耗
116 SANS 10219-2 The determination of performance (at net power) of industrial internal combustion engines — Part 2: Test methods
   工业用内燃机性能检测—测试方法
117 SANS 10219-3 The determination of performance (at net power) of industrial internal combustion engines — Part 3: Test measurements
   工业用内燃机性能检测—试验设备
118 SANS 10219-4 The determination of performance (at net power) of industrial internal combustion engines — Part 4: Speed governing
   工业用内燃机性能检测—速度控制
119 SANS 10219-5 The determination of performance (at net power) of industrial internal combustion engines — Part 5: Torsional vibrations
   工业用内燃机性能检测—扭转振动
120 SANS 10219-6 The determination of performance (at net power) of industrial internal combustion engines — Part 6: Overspeed protection
   工业用内燃机性能检测——超速防护装置
121 SANS 10228 The identification and classification of dangerous goods for transport
   道路运输危险物品定义和分类
122 SANS 10231 Transportation of dangerous goods — Operational requirements for road vehicles
   危险物品运输—道路车辆操作要求
123 SANS 10267 Homologation of motor vehicle models
   机动车辆车型认证
124 SANS 10281 Engine speed (S values), reference sound levels and permissible sound levels of stationary road vehicles
   发动机转速,基准声压和车辆静止时许可噪音
125 SANS 10310 The manufacture and reconditioning of replacement brake lining assemblies
   备用制动衬片总成的生产和修理
126 SANS 10319 The registration of manufacturers, importers and builders of categories M, N and O motor vehicles
   M, N 和O类厂家,进口商和组装厂家注册
127 SANS 10399 Quality management systems — Requirements for bus operators
   质量管理体系—客车运作要求
128 SANS 10408 Repairs to tyres for motor vehicles
   机动车轮胎维修
129 SANS 11446 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 13-pole connectors for vehicles with 12 V nominal supply voltage
   牵引车和挂车的电连接器——标称电源电压为12V的车辆用13极连接器
130 SANS 12098 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 15-pole connector for vehicles with 24 V nominal supply voltage
   牵引车和挂车的电连接器——标称电源电压为24V的车辆用15极连接器
131 SANS 16949 Quality management systems — Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations
   质量管理体系—汽车和零部件生产厂家申请ISO 9001:2000的特殊要求
132 SANS 170254 General requirements for the competence of testing and calibration laboratories
   检测校正实验室能力的一般要求
133 SANS 20001 Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam and/or a driving beam and equipped with filament lamps of categories R2 and/or HS1
   关于发射不对称远光（近光）和R2和/或HS1白炽灯泡的机动车前照灯认证的统一规定
134 SANS 20003 Uniform provisions concerning the approval of retro-reflecting devices for power-driven vehicles and their trailers
   关于机动车及其拖车回复反射器认证的统一规定
135 SANS 20004 Uniform provisions for the approval of devices for the illumination of rear registration plates of motor vehicles (except motor cycles) and their trailers
   关于机动车及其拖车(不含摩托车)的后牌照灯认证的统一规定
136 SANS 20005 Uniform provisions for the approval of motor vehicle "sealed beam" headlamps (SB) emitting a European asymmetrical passing beam or a driving beam or both
   关于欧洲型不对称近光和/或远光机动车封闭式前照灯(SB)认证的统一规定
137 SANS 20006 Uniform provisions concerning the approval of direction indicators for motor vehicles and their trailers
   关于机动车及其拖车转向灯认证的统一规定
138 SANS 20007 Uniform provisions concerning the approval of front and rear position (side) lamps, stop-lamps and end-outline marker lamps for motor vehicles (except motorcycles) and their trailers
   关于机动车(不含摩托车)及其挂车前（后）位置(侧边)灯,制动灯和示廓灯认证的统一规定
139 SANS 20008 Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with halogen filament lamps (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1 and/or HIR2)
   关于不对称射近光和/或远光并装有卤素灯(H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1, HIR2和/或H11)的机动车前照灯认证的统一规定