中国绿色照明工程至今已10年，“建筑照明设计标准”（GB50034 - 2004）已为15个月实施。 “一个工程”，“关于推广节能标准”节能照明发挥了重要作用。尤其是高效率，高品质（如三色荧光灯）的推广和应用成果光源是非常显着。同时，气体放电的节能灯镇流器，照明质量没有足够的重视。镇流器是一个高耗能设备，如更广泛的直管荧光灯镇流器使用，其对光源的功率15％?35％的权力，是一个相当高的比例。当前的任务：{dy}，提高镇流器的能源效率和质量，二是高的质量和效率镇流器的合理选择。

的首要任务是为产品研发，生产部门的任务，照明设计是第二单位和施工单位，使用单位的责任。

气体放电灯镇流器有两大类：

（1）电感镇流器，包括普通型和节能;（2）电子镇流器，20世纪，进入市场，结束了70年代，我国从上世纪80年代中期的开发和生产。镇流器等产品也有谐波含量的大小，功耗不同尺寸的产品。

普通型节能镇流器没有具体的界限，促进不便使用。关于直管荧光灯能效等级标准，欧盟已经要求的具体数据，不同档次的产品提供了参考的权力的限度。表1列出了有关T8荧光灯镇流器的能源效率水平的分裂欧盟的塞尔马组织。

，欧盟已禁止使用C级和D级的电感镇流器，这是中国新近颁布的国家标准，“建筑照明设计标准”（GB50034 - 2004）明确规定，城市不应该使用的感应流浏览器。该标准还规定，应采用直管荧光灯或节能电子镇流器电感镇流器。前者相当于受欧盟A2和A3级水平的产品，后者相当于水平B1和B2级的产品。从标准组织编写的“标准培训研讨会”的信息，可以在“照明功率密度（LPD）的”标准测量数据，电子镇流器系统电源的发展视为相当于A2级，节能电感镇流器系统电源略高于B1级，但低于B2级。

Ballasts and lighting ballasts for the significance of energy efficiency

China’s green lighting project has so far been a decade, “Architectural Lighting Design Standards” (GB50034-2004) has been implemented for the 15 months. “A project”, “a standard” on the promotion of energy-saving lighting has played an important role. In particular are highly efficient, high quality light source (such as three-color fluorescent lamp) the popularization and application of results is very remarkable. At the same time, gas discharge lamp ballast of energy saving and lighting quality has not been sufficient attention. Ballast is a high energy-consuming devices, such as wider use of the straight tube fluorescent lamp ballasts, its own power for the light source power 15% ~ 35%, is a rather high percentage. Current mission: First, improve the energy efficiency of ballasts and quality; the second is a reasonable selection of high quality and efficiency of the ballast.

first task is to product research, production departments mission; lighting design are second units and construction units, use the unit’s responsibility.

gas discharge lamp ballasts There are two major categories:

(1) inductive ballast, including the general type and energy-saving; (2) electronic ballast, the 20th century, the end of the 70s into the market, our country from the last century, the mid-80’s development and production. Products such ballasts also have harmonic content of the size, power consumption of different sizes Product.

ordinary type and energy-saving ballasts no specific boundaries, promote the use of inconvenience. The European Union about the straight tube fluorescent lamps energy efficiency grading standards have specific data requirements, different grades of products provides the power limits for reference. Table 1 lists the EU’s CELMA organizations about T8 fluorescent lamp ballast energy efficiency levels of division.

the European Union has banned the use of the C-class and D class inductance ballasts, it is China’s newly promulgated national standards, “Architectural Lighting Design Standards” (GB50034-2004) clearly provides that the town should not use the inductive flow browser. The standard also provides that should be used straight tube fluorescent lamps or energy-saving electronic ballast inductance ballasts. The former is equivalent to the EU subject A2 and A3 grade level products; the latter is equivalent to level B1 and B2-class products. From the standards group to prepare a “standard training seminars” information can be seen in the development of “lighting power density (LPD)” standard measured data, electronic ballast system power is equivalent to A2 level, energy-saving ballast inductor system power is slightly higher than the B1 level, but below the B2 level. (07-11-27)