问：
我们知道更多，毛织物始终水洗后缩绒现象，铣床的现象是：具体而言，织物表面将发挥小绒球，羊毛回去交织在一起，形成一个小波姆庞这将导致面料并不平坦，不漂亮，但结构将缩小规模较小，如何解决这个问题！谢谢您！

答：
众所周知，羊绒衫是由细纤维的特点，产品柔软滑糯。为了充分发挥其特点的特别漂洗进程中设置的加工，这个过程是目的之一是缩小一些羊绒涵盖了该组织的表面，使毛衣纤维纱出它的软对接触;若桩太小时，会感觉非常糟糕。因此，模糊羊绒衫表面层是必须的。在这种情况下，可以像我们可以看到，只要联系与对绒毛表面羊绒衫的摩擦将与相互交织在一起，成为球形。在正常情况下将部分产生的小球可以用手拉将不影响穿着效果。羊绒衫起球是在国家标准的规定达到3个合格的产品。
羊绒因为它的“轻，软，凉，糯毛衣，”功能，一直深受国内外消费者的欢迎。在穿着羊绒衫的过程很多消费者，羊绒衫起球现象被发现，因此人们对羊绒衫的质量无疑是现在在这个问题上做的是对广大消费者介绍。

影响织物起毛起球少暴露在表面的纤维头以下主要因素：

纤维长度：到球上织成的织物的短纤维轻度交织纤维较长，单位长度由于段的数量在纤维纱线和面料较少副作用，此外，长纤维持有其中规模较大的县容易进入纱线，织物表面的滑动起来。

纤维细度：纤维粗纤维小球是不容易的。粗纤维纺成纱，每单位面积的纤维根数少暴露了纤维纱线和织物表面方少;此外，更多的粗纤维，更坚固，竖起一球织物的纤维表面容易缠结。

纤维卷曲度：卷曲纤维多的纤维维系大，摩擦增加，纤维很难自由的织物表面，不容易起球。

纤维横截面的形状：两岸的圆形纤维截面形状的纤维维系一个小交叉比附近的三角形，多边形等异形纤维容易扮演的球纤维截面形状。

纤维强度，伸长率和弹性：纤维强度，高伸长率，灵活性是不容易当一个好的摩擦磨损中断，一旦绒毛，使用方便缠结成球。

纱：捻度大，纤维间结合紧密，织物起毛起球程度的减少。

织物结构：针织面料容易起球。

此外，织物后整理过程中，穿洗织物起毛起球的方式一定程度冲击。为什么

羊绒衫起球？这是山羊绒纤维的特点决定的。

分析了从原料，羊绒细度14.5 - 15.9um，长度30 - 40毫米，卷曲显示3-4个/厘米显示，羊绒是一个薄，短曲羊毛和规模较小的纤维小的程度;羊绒纤维交叉截面接近圆形;羊绒或单纤维的强大实力，优良的伸长率和弹性纤维。
从羊绒纱捻分析
，为了得到良好的感觉羊绒衫，在纺纱时，不应该扭曲过大，因此纤维并不十分紧密相连。

的羊绒衫的结构，从分析等，开士米毛衣针织，为了使羊绒充分发挥柔软，滑爽糯的特点，在后整理，这是必不可少的关键进程，从而铣削过程，这个过程的目的是，是对羊绒纤维的组成部分之一缩小覆盖在羊绒衫组织的表面了，所以软，因此它是为使绒毛的表面容易羊绒衫相互缠结球。

综上所述，不难作出结论的是，起球羊绒衫少量是正常现象，在其原料，捻度及织物结构性质的原因，有一个很大。全国纺织行业标准对针织品起球明确界定，因为球系列分为1-5级：最严重的一球;目标分为两个显着的影响;一般球3，4级的小球，5为{zj0}，因为买不起球。对羊绒针织品起球标准同样清楚的是高品质的产品起毛起球不低于3-4级，{yl}的产品起毛起球不少于3个系列羊绒针织品数量。

作为一个消费者，应该在穿着羊绒衫与硬物的品种，以避免摩擦。如果您发现局部起球可以轻轻地删除它们现象，然后清洗熨烫，不会影响穿着效果。

How to solve the wool milling phenomenon?

Question:
we know more, wool fabric always washed after fulling phenomenon, that is, Milling phenomenon: specifically, the fabric surface will play a lot of small pompon, wool back intertwined to form a small pompon This will cause the fabric was not smooth, not pretty, but the fabric will shrink smaller, how to solve this problem! Thank you!

Answer:
is well known that cashmere sweater is characterized by a thin fibers, the product soft slippery waxy. In order to give full play to its characteristics, in the processing of the special set fulling process, this process is one of the purposes is to shrink the yarn in some fiber out of the cashmere sweater covering the surface of the organization to make it soft to the touch; if the pile is too small when the , would feel very bad. Therefore, the surface layer of fuzzy cashmere sweater is a must. Under these conditions, can be like we can see, as long as the contact and friction with the cashmere sweater on the surface of the villi would be intertwined with each other and become spherical. Under normal circumstances will be partially generated by small ball can be pulled out by hand will not affect the wear results. Pilling of cashmere sweaters in the national standard requirement will achieve the three qualified products.
Cashmere sweater because of its “light, soft, cool, waxy,” features, has been well received by domestic and foreign consumers. Many consumers in the process of wearing a cashmere sweater, cashmere sweater pilling phenomenon was found, and therefore cast doubt on the quality of the cashmere sweater is now on this issue to do an introduction to the general consumers.

affecting fabric pilling the following main factors:

fiber length: longer fibers woven into the fabric pilling degree of light on the shorter fibers woven into the fabric; unit length due to the number of segments within the fiber head less exposed the surface of the fiber yarn and fabric fewer side; In addition, the long fibers hold together among the larger county easily slide into the yarn and fabric surfaces.

fiber fineness: crude fiber smaller fiber is not easy pilling. Crude fiber spun into yarn, fibrous root number per unit area less exposed surface of the fiber yarn and fabric side less; In addition, the more coarse fibers, the more rigid, ruffled the surface of the fabric fibers easily tangles into a ball.

fiber crimp degree: curly fibers and more fibers hold together large, friction increases, fiber difficult to free the fabric surface, will not be easy pilling.

fiber cross-sectional shape: the cross-sectional shape of a circular fiber, the fibers hold together a small cross-sectional shapes than the fibers near the triangle, polygon, etc. profiled fiber easy to play the ball.

fiber strength, elongation and flexibility: fiber strength, high elongation, flexibility is not easy when a good friction and wear break off, once the fluff, the easy to tangle into a ball.

twist yarn: yarn twist large, inter-fiber binding tight, the fabric pilling degree of reduction.

fabric structure: knitted fabrics easier than pilling.

In addition, the fabric finishing process and wear washable fabric pilling way the degree of impact. Why

cashmere sweater pilling? This is the cashmere fiber characteristics of decision.

analyzed from raw materials, cashmere fineness of 14.5-15.9um, length 30-40mm, crimp indicate 3-4 months / cm, showed that cashmere is a thin short and curly wool and a small degree of smaller fiber ; cashmere fiber cross-section almost circular; cashmere or a single fiber strength strong, excellent elongation and elastic fibers.

from the cashmere yarn twist analyzed, in order to get a good feel cashmere sweater, when the twist in spinning should not be too large, and therefore the fibers are not very closely tied.

the structure of cashmere sweaters, etc. from the analysis, cashmere sweaters are knitted, and in order to make cashmere soft, smooth waxy characteristics into full play, in the post-finishing, it is essential to the key process through which a milling process, the purpose of this process is is one of the parts of the cashmere fibers shrink out of covering the surface of the organization in the cashmere sweater, so soft, so it is easy for the cashmere sweater into the surface of the villi of mutual entanglement ball.

To sum up, is not difficult to arrive at a conclusion that a small amount of pilling cashmere sweater is a normal phenomenon, the causes with the nature of its raw materials, yarn twist and fabric structure has a lot to. National Textile pilling on knitwear industry standards are clearly defined, since the ball series is divided into 1-5 grades: a worst serious pilling; two goals to significantly effect; 3 for the general pilling; 4 level minor pilling; 5 as the best, as the ball can not afford. Standards for pilling cashmere knitwear is also clear that high-class product pilling cashmere knitwear number of not less than 3-4 grade, first-class product pilling series of not less than three.

as a consumer, should be in the wearing cashmere sweater with a variety of hard objects to avoid friction. If you find that the phenomenon of partial-pilling can gently remove them, and then cleaning ironing, will not affect the wear results.04-10-01