欧式接线端子台

Euro Terminal Blocks

欧式接线端子的脚距3.5mm、3.8mm、5.0mm、5.08mm、6.35mm、7.5mm、7.62mm、9.5mm、10.0mm、10.16mm，并含有90°,135°,180°，等三种进线方向，配合单层、双层和三层的设计,使应用的选择性多样化。产品设计符合IEC60998、UL1059等国际标准并通过UL、VDE等认证。

Euro terminal blocks, Available different pitches to be chose, there are 90ºC, 135 ºC,180 ºC three type to insert lines ,design with monolayer, double decks, and three decks, give more choices for convenient use

The products are designed in accordance with IEC60998、UL1059 standards and we have got the approvals of UL,VDE, etc

插座式端子台

Pluggable Terminal Blocks

插座式端子台提供3.5mm、3.81mm、5.0mm、5.08mm、7.5mm、7.62mm等不同间距的插头。为了应不同场合的使用需要，提供水平插头、垂直插头、与同方向进线插头等选择。产品设计符合IEC60998、UL1059等国际标准并通过UL、VDE等认证。

Pluggable terminal blocks, Available different pitches can be chose, you can choose the insert direction, contact direction, plug-in direction according your requirement.

The products are designed in accordance with IEC60998、UL1059 standards and we have got the approvals of UL,VDE, etc.

免螺丝式端子台

Screwless Terminal Blocks

免螺丝式接线端子提供2.5mm、2.54mm、3.5mm、5.0mm、7.5mm、7.62mm等间距，圆棒端子及单芯线能直接插入，不需要手把的辅助，但较小的电线可用手把打开夹子将电线夹紧。大部分免螺丝式端子台都是以一片一片组合而成。产品设计符合IEC60998、UL1059等国际标准，大部分产品通过UL、VDE等认证。

Screwless Terminal Blocks, Available different pitches can be chose, round stick and single pitch terminal block can insert directly with hand ship, it can also fit for small wire range.

The products are designed in accordance with IEC60998、UL1059 standards and we have got the approvals of UL,VDE, etc.

保险座接线端子台

Fuse Through Terminal Blocks

此系列为保险座接线端子台，带保险丝，它可将二导体方便、可靠连接起来，可以连接0.75mm² 至30 mm² 的所有类型的导线。产品设计符合IEC60998、UL1059等国际标准并通过UL、VDE等认证。

Fuse through terminal blocks, with fuse, connecting with two conductors easily and credibility. Provide the wire size from 0.75mm² to 30 mm^2.

The products are designed in accordance with IEC60998、UL1059 standards and we have got the approvals of UL,VDE, etc.

贯通式端子台

Feed Through Terminal Blocks

此系列为贯通式端子台，不带保险丝，它可将二导体方便、可靠连接起来。可以连接0.75mm² 至30 mm² 的所有类型的导线。产品设计符合IEC60998、UL1059等国际标准并通过UL、VDE等认证。

Feed through terminal blocks, without fuse, connecting with two conductors easily and credibility. Provide the wire size from 0.75mm² to 30 mm^2.

The products are designed in accordance with IEC60998、UL1059 standards and we have got the approvasl of UL,VDE, etc.

美式、日式接线端子台

American, Japanese Terminal Blocks

美式、日式接线端子，接线直观明了，可以连接截面为0.32 MM²至5.3 MM²的所有类型的导线。间距7.62-11mm可供选择。可提供有盖、无盖等款式。产品设计符合IEC60998，UL1059, CSA C22.22 No.158等国际标准。

American, Japanese Terminal Blocks, connecting easily, provide the wire range size from 0.32mm² to 5.3mm². Available with different pitches from 6.35mm to 14mm, you can choose with cover or without cover with your requirement.

The products are designed in accordance with IEC60998、UL1059 standards and we have got the approvals of UL,VDE, etc.

开关、按钮

DIP Switch. Tact Switch & ZIF Socket

开关,按钮系列, 具有产品寿命长，使用方便等特点。DIP开关分为平拨,侧拨。盖子样式和颜色有多种可供选择. 下板方式分为180度直和90度折弯类型。

DIP Switch. Tact Switch & ZIF Socket, for these series products, have the excellence easy use, long life. DIP Switches have flat dial type and side dial type; we have different colors cover can be chose. for the deep board you can choose straight 180 º or bend 90

排针排座

Pin Header. Female Header

此系列产品提供2.00mm、2.54mm的间距，及180度、90度折弯、SMT、IDC刺破式等多种下板方式可供选择。产品分为单排、双排、及单排双塑胶、双排双塑胶等多种结构。端子电镀种类多，客户可根据需求自行选择。

Pin Header. Female Header, pitch: 2.00mm、2.54mm; machine pin: straight type、right angle type、IDC type. Etc. for the structures now we have single row ,double rows, single row with double plastic and double rows with double plastic. various plating ways can be chose 

IC座

Screw Machine Pin. IC Socket

DIP IC座脚距分为1.778mm、2.54mm，下板方式分为180度直和贴片式等类型，端子电镀种类多，客户可根据需求自行选择。

Screw Machine Pin. IC Socket, the pitch of DIP IC Socket is 1.778mm、2.54mm. Machine pin straight & SMT type etc. various plating ways can be chose

简易牛角、卡钩牛角

简易牛角脚距分为1.27mm,2.00mm,2.54mm，下板方式分为180度直， 90度折弯和表面贴片式多种下板方式可供选择；卡钩牛角脚距为2.54mm，下板方式分为180度直,90度折弯类型。卡钩牛角卡钩的种类可自行选择。

DIP 插头、IDC 座、CF卡座、ZIF座、FPC/FFC

DIP 刺破式压线式连接器，脚距为2.54mm 及4排脚1.27*2.00mm间距连接器；IDC Socket 脚距分为1.27mm,2.00mm,2.54mm；ZIF Socket 提供各种宽度可供选择

提供各种D-SUB：下板方式分为焊线式，180度插板式，90度折弯式，刺破式压线及D-SUB 护套，护套的材料有塑胶（ABS）和金属（锌合金）两种可供选择

MINI USB 脚距0.8mm;USB A 下板方式分为焊线式和90度折弯插板式。