How should the LED projector be wired
    The main advantages of outdoor high-power LED floodlights are long service time and low failure rate. But the premise should be after reasonable installation. In the face of complicated wiring steps, how to secure the wiring of LED casting lamp?
    The projector has three wires, which are blue, brown and yellow-green. Connect the blue wire and the brown wire to the fire wire and the lead wire, regardless of polarity. Generally connected to the ground can lead the current to the bottom, when the electrical equipment leakage or voltage is too high can play a certain protection. If have ground wire, had better connect, if do not have ground wire, need to do waterproof leakage measure well. This is the first step in the safety wiring of the projector
    The power supply of led casting lamp is high-voltage alternating current. Please pay attention to stay away from the place easily accessible by people when installing the lamp, and do a good grounding treatment to avoid electric shock accident. The power of the throwing lamp is relatively large. When wiring, the installation personnel should choose the appropriate power line according to the actual power of the lamp, and provide power in phases. The installation position must be able to bear the weight of the projector, and the best bearing capacity is above 10 of the projector weight to ensure that the lamp is firmly installed.
郑重声明:资讯 【How should the LED projector be wired】由 GUANGDONG JAY LIGHTING CO., LTD. 发布,版权归原作者及其所在单位,其原创性以及文中陈述文字和内容未经(企业库qiyeku.com)证实,请读者仅作参考,并请自行核实相关内容。若本文有侵犯到您的版权, 请你提供相关证明及申请并与我们联系(qiyeku # qq.com)或【在线投诉】,我们审核后将会尽快处理。
—— 相关资讯 ——