Home
Menu
Navigation menu
Working principle and operation method of tape sealing machine
Browse: 788
Time: 2018/11/10
The working principle of the tape sealing machine: the power is turned on, the motor is started, and the sealed box enters the sealing machine through the conveyor belt. When the left and right movements of the sealing machine touch the tape, the left and right movements are completed and completed at the same time. Sealing, smoothing, cutting and other sealing actions.
    Tape sealing machine operation method
1. Adjust the height of the workbench: Loosen the tripod locking screw on the inside of the tripod, pull out the tripod adjustment bracket according to the required height, and then tighten the tripod locking screw.
2. Put the box into the conveyor belt, and put the length into about one-third of the length of the box. According to the size of the box, shake the vertical rocker handle, move the lifting frame, adjust the height of the movement, and make the movement The drop touches the box.
3. Adjust the position of the guide wheel in order to make the cover close. Loosen the hand wheel, push the guide wheel frame, make the guide wheel close to the sides of the box, and then lock the hand wheel.
4. Shake the horizontal rocker handle, adjust the position of the conveyor belt horizontally, make the conveyor belt clamp the box together, then take out the box, then shake the handle to make the conveyor belt lean again. After the adjustment is completed, it can work continuously.
5. Install the tape tray on the tape holder of the upper and lower movements according to the figure, so that the glue faces the direction of the box, and then the adhesive surface bypasses the guide belt idler, and the rubber surface bypasses the one-way copper wheel. Between the front and back to the top line and the rubber wheel, keep the glue facing the direction of the box.
6. Press the power switch and push it into the box. The box will advance along with the conveyor belt. After the interlocking mechanism, the carton is automatically sealed and cut.