标准销售 有需要南非机动车标准的朋友，可以联系我：QQ: 59590038或直接发邮件给我niloul@163.com

140 SANS 20010 Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility
   关于车辆电磁兼容性认证的统一规定
141 SANS 20011 Uniform provisions concerning the approval of vehicles with regard to door latches and door retention components
   关于车辆门锁和车门保持件认证的统一规定
142 SANS 20012 Uniform provisions concerning the approval of vehicles with regard to the protection of the driver against the steering mechanism in the event of impact
   关于碰撞中防止转向机构伤害驾驶员的统一规定
143 SANS 20013 Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking
   关于M, N 和O类车辆制动认证的统一规定
144 SANS 20013-H Uniform provisions concerning the approval of passenger cars with regard to braking
   关于乘用车制动认证的统一规定
145 SANS 20014 Uniform provisions concerning the approval of vehicles with regard to safety-belt anchorages
   关于车辆安全带固定点认证的统一规定
146 SANS 20016 Uniform provisions concerning the approval of safety-belts and restraint systems for adult occupants of power-driven vehicles
   关于机动车成年乘客用安全带和约束系统认证的统一规定
147 SANS 20017 Uniform provisions concerning the approval of vehicles with regard to the seats, their anchorages and any head restraints
   关于座椅，座椅固定点和头枕认证的统一规定
148 SANS 20019 Uniform provisions concerning the approval of motor vehicle front fog lamps
   关于车辆前雾灯认证的统一规定
149 SANS 20020 Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with halogen filament lamps (H4 lamps)
   关于非对称近光和/或远光并装有卤素灯(H4)的机动车前照灯的统一规定
150 SANS 20021 Uniform provisions concerning the approval of vehicles with regard to their interior fittings
   关于车辆内饰件认证的统一规定
151 SANS 20022 Uniform provisions concerning the approval of protective helmets and of their visors for drivers and passengers of motor cycles and mopeds
   关于摩托车和轻便摩托车驾驶员及、乘客用头盔和面罩认证的统一规定
152 SANS 20023 Uniform provisions concerning the approval of reversing lamps for power-driven vehicles and their trailers
   关于机动车辆及其挂车的倒车灯认证的统一规定
153 SANS 20027 Uniform provisions for the approval of advance-warning triangles
   关于三角警告牌的统一规定
154 SANS 20028 Uniform provisions for the approval of audible warning devices and of motor vehicles with regard to their audible signals
   关于机动车辆声响信号和声音警报装置认证的统一规定
155 SANS 20031 Uniform provisions concerning the approval of halogen sealedbeam unit (HSB unit) motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both
   关于非对称近光和/或远光的卤素封闭式（HSB）机动车前照灯认证的统一规定
156 SANS 20036 Uniform provisions concerning the approval of large passenger vehicles with regard to their general construction
   关于大型客车一般结构认证的统一规定
157 SANS 20037 Uniform provisions concerning the approval of filament lamps for use in approved lamp units of power driven vehicles and of their trailers
   关于机动车及其挂车的已经批准灯具用白炽灯认证的统一规定
158 SANS 20039 Uniform provisions concerning the approval of vehicles with regard to the speedometer equipment including its installation
   关于车辆车速表及其安装认证的统一规定
159 SANS 20040 Uniform provisions concerning the approval of motorcycles equipped with a positive-ignition engine with regard to the emission of gaseous pollutants by the engine
   关于点火式发动机摩托车的气体污染物的排放认证的统一规定
160 SANS 20043 Uniform provisions concerning the approval of safety glazing materials
   关于安全玻璃和玻璃材料认证的统一规定
161 SANS 200448 Uniform provisions concerning the approval of restraining devices for child occupants of power-driven vehicles ("child restraint system")
   关于机动车儿童乘客约束装置（儿童约束系统）认证的统一规定
162 SANS 20046 Uniform provisions concerning the approval of rear-view mirrors, and of motor vehicles with regard to the installation of rear-view mirrors
   关于机动车后视镜和就后视镜安装认证的统一规定
163 SANS 20047 Uniform provisions concerning the approval of mopeds equipped with a positive-ignition engine with regard to the emission of gaseous pollutants by the engine
   关于点火发动机轻便摩托车气体污染物排放认证的统一规定
164 SANS 20048 Uniform provisions concerning the approval of vehicles with regard to the installation of lighting and light-signalling devices
   关于车辆灯光和光信号装置安装认证的统一规定
165 SANS 20049 Uniform provisions concerning the approval of compression ignition (C.I.) and natural gas (NG) engines as well as positive ignition (P.I.) engines fuelled with liquefied petroleum gas (LPG) and vehicles equipped with C.I. and NG engines and P.I. engines fuelled with LPG, with regard to the emissions of pollutants by the engine
   关于压缩式发动机、天然气发动机和使用液化石油气的点火发动机及装有这三种发动机的车辆的污染物排放认证的统一规定
166 SANS 20050 Uniform provisions concerning the approval of front position lamps, rear position lamps, stop lamps, direction indicators and rear-registration-plate illuminating devices for mopeds, motor cycles and vehicles treated as such
   关于轻便摩托车、摩托车及其类似车辆前后位置灯、制动灯、转向信号灯和后牌照板照明装置认证的统一规定
167 SANS 20052 Uniform provisions concerning the approval of M2 and M3 small capacity vehicles with regard to their general construction
   关于M2类和M3类小型公共运输车辆一般结构认证的统一规定
168 SANS 20053 Uniform provisions concerning the approval of category L3 vehicles with regard to the installation of lighting and light signalling devices
   关于L3 类（摩托车）灯光及光信号装置的安装认证的统一规定
169 SANS 200556 Uniform provisions concerning the approval of mechanical coupling components of combinations of vehicles
   关于汽车列车机械联结件的统一规定
170 SANS 20056 Uniform provisions concerning the approval of headlamps for mopeds and vehicles treated as such
   关于轻便摩托车以及类似车辆前照灯认证的统一规定
171 SANS 20057 Uniform provisions concerning the approval of headlamps for motor cycles and vehicles treated as such
   关于摩托车以及类似车辆前照灯认证的统一规定
172 SANS 20059 Uniform provisions concerning the approval of replacement silencing systems
   关于备用消声系统认证的统一规定
173 SANS 20060 Uniform provisions concerning the approval of two-wheeled motor cycles and mopeds with regard to driver-operated controls including the identification of controls, tell-tales and indicators
   关于两轮摩托、轻便摩托驾驶员操纵件，信号装置，指示器认证的统一规定
174 SANS 20062 Uniform provisions concerning the approval of power-driven vehicles with handlebars with regard to their protection against unauthorized use
   关于带有操纵把的机动车防盗系统认证的统一规定
175 SANS 20063 Uniform provisions concerning the approval of two-wheeled mopeds with regard to noise
   关于两轮轻便摩托车噪声认证的统一规定
176 SANS 20065 Uniform provisions concerning the approval of special warning lamps for power-driven vehicles and their trailers
   关于机动车及其拖车特别警告灯认证的统一规定
177 SANS 20067 Uniform provisions concerning:
   I) approval of specific equipment of motor vehicles using liquefied petroleum gases in their propulsion system;
   II) approval of a vehicle fitted with specific equipment for the use of liquefied petroleum gases in its propulsion system with regard to the installation of such equipment
   关于：
   1.液化石油气驱动的机动车辆专用特殊装置;
   2.液化石油气驱动的机动车辆专用特殊装置的安装认证的统一规定
178 SANS 20069 Uniform provisions concerning the approval of rear marking plates for slow-moving vehicles (by construction) and their trailers
   关于低速车辆及其挂车后标志牌认证的统一规定
179 SANS 20070 Uniform provisions concerning the approval of rear marking plates for heavy and long vehicles
   关于重，长型车辆后标志牌认证的统一规定
180 SANS 20072 Uniform provisions concerning the approval of motor cycle headlamps emitting an asymmetrical passing beam and a driving beam and equipped with halogen filament lamps (HS1)
   关于发射非对称近光和远光并装有卤素灯(HS1灯)的摩托车前大灯认证的统一规定
181 SANS 20073 Uniform provisions concerning the approval of goods vehicles, trailers and semi-trailers with regard to their lateral protection
   关于货车、挂车和半挂车侧面碰撞保护装置认证的统一规定
182 SANS 20074 Uniform provisions concerning the approval of category L1 vehicles with regard to the installation of lighting and light signalling devices
   关于轻便摩托车灯具和光信号装置安装认证的统一规定
183 SANS 20075 Uniform provisions concerning the approval of pneumatic tyres for motor cycles and mopeds
   关于摩托车气压轮胎认证的统一规定
184 SANS 20076 Uniform provisions concerning the approval of headlamps for mopeds emitting a driving beam and a passing beam
   关于轻便摩托车远光和近光的前照灯认证的统一规定
185 SANS 20078 Uniform provisions concerning the approval of vehicles of category L with regard to braking
   关于L类车辆制动认证的统一规定
186 SANS 20080 Uniform provisions concerning the approval of seats of large passenger vehicles and of these vehicles with regard to the strength of the seats and their anchorages
   关于大型客车座椅及其固定点认证的统一规定
187 SANS 20081 Uniform provisions concerning the approval of rear-view mirrors and of two-wheeled power-driven vehicles with or without side car, with regard to the installation of rear-view mirrors on handlebars
   关于两轮摩托车的后视镜及后视镜安装认证的统一规定
188 SANS 20082 Uniform provisions concerning the approval of moped headlamps equipped with filament halogen lamps (HS2 lamps)
   关于装有白炽卤素灯（HS2）的轻便摩托车前照灯认证的统一规定
189 SANS 20083 Uniform provisions concerning the approval of vehicles with regard to the emission of pollutants according to engine fuel requirements
   根据发动机燃油要求，车辆污染物排放认证的统一规定
190 SANS 20084 Uniform provisions concerning the approval of passenger cars equipped with an internal combustion engine with regard to measurement of fuel consumption
   关于内燃机乘用车油耗测量的统一规定
191 SANS 20086 Uniform provisions concerning the approval of agricultural or forestry tractors with regard to the installation of lighting and light-signalling devices
   关于农林拖拉机灯光和光信号装置安装认证的统一规定
192 SANS 20087 Uniform provisions concerning the approval of daytime running lamps for power-driven vehicles
   关于机动车白天行车灯认证的统一规定
193 SANS 20088 Uniform provisions concerning the approval of retroreflective tyres for two-wheeled vehicles
   关于摩托车反光轮胎的统一规定
194 SANS 20089 Uniform prescriptions for approval of:
   I. Vehicles with regard to limitation of their maximum speed or their adjustable speed limitation function
   II. Vehicles with regard to the installation of a speed limiting device (SLD) or adjustable speed limitation device (ASLD) of an approved type
   III. Speed limitation devices (SLD) and adjustable speed limitation device (ASLD)
   关于
   1. 车辆{zg}车速限制及其限速调节功能
   2. 车辆和已批准的车速限制装置的安装
   3. 车速限制装置及其调节装置认证的统一规定
195 SANS 20090 Uniform provisions concerning the approval of replacement brake lining assemblies and drum brake linings for power-driven vehicles and their trailers
   关于机动车辆及其挂车用备用制动衬片总成和鼓式制动衬片认证的统一规定
196 SANS 20091 Uniform provisions concerning the approval of side-marker lamps for motor vehicles and their trailers
   关于机动车及其挂车侧标志灯证的统一规定
197 SANS 20096 Uniform provisions concerning the approval of compression ignition (C.I.) engines to be installed in agricultural and forestry tractors and in non-road mobile machinery with regard to the emissions of pollutants by the engine
   关于农林用拖拉机和非道路机械用的压燃式发动机污染物排放认证的统一规定
198 SANS 20098 Uniform provisions concerning the approval of motor vehicle headlamps equipped with gas-discharge light sources
   关于气体放电光源的机动车前照灯认证的统一规定
199 SANS 20099 Uniform provisions concerning the approval of gas-discharge light sources for use in approved gas-discharge lamp units of power-driven vehicles
   关于已通过认证的机动车的气体放电灯具的气体放电光源认证的统一规定
200 SANS 20101 Uniform provisions concerning the approval of passenger cars powered by an internal combustion engine only, or powered by a hybrid electric power train with regard to the measurement of the emission of carbon dioxide and fuel consumption and/or the measurement of electric energy consumption and electric range, and of categories M1 and N1 vehicles powered by an electric power train only with regard to the measurement of electric energy consumption and electric range
   关于M1 和 N1 类车辆内燃机或混合发动机乘用车CO2排放和油耗及/或电消耗量和电压范围的测量的认证的统一规定
201 SANS 20104 Uniform provisions concerning the approval of retro-reflective markings for heavy and long vehicles and their trailers.
   关于重、长型机动车及其挂车回复反射标志的统一规定
202 SANS 20107 Uniform provisions concerning the approval of double-deck large passenger vehicles with regard to their general construction
   关于大型双层客车一般结构认证的统一规定
203 SANS 20108 Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for motor vehicles and their trailers
   关于机动车及其挂车用翻新气压轮胎生产认证的统一规定
204 SANS 20109 Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for commercial vehicles and their trailers
   关于商用车及其挂车用翻新气压轮胎生产认证的统一规定
205 SANS 20110 Uniform provisions concerning the approval of:
   I. Specific components of motor vehicles using compressed natural gas (CNG) in their propulsion system;
   II. Vehicles with regard to the installation of specific components of an approved type for the use of compressed natural gas (CNG) in their propulsion system
   关于I.压缩天然气（CNG）驱动机动车的专用部件 II. 压缩天然气（CNG）驱动机动车的专用部件安装的认证的统一规定
206 SANS 20111 Uniform provisions concerning the approval of tank vehicles of categories N and O with regard to rollover stability
   关于N 类和O 类罐式机动车倾翻稳定性认证的统一规定
207 SANS 20112 Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with filament lamps
   关于不对称远光和/或近光和装有白炽灯泡的机动车前照灯认证的统一规定
208 SANS 20124 Uniform provisions concerning the approval of wheels for passenger cars and their trailers
   关于轿车及其拖车车轮认证的统一规定
209 SANS 24135-1 Industrial trucks — Specifications and test methods for operator restraint systems — Part 1: Lap-type seat belts
   工业用车—保护系统的测试方法和规格——围式座位皮带
210 SANS 60095-1 Lead-acid starter batteries — Part 1: General requirements and methods of test
   铅酸启动电瓶—测试的一般要求和方法
211 SANS 60095-2 Lead-acid starter batteries — Part 2: Dimensions of batteries and dimensions and marking of terminals
   铅酸启动电瓶—电池尺寸及电极的尺寸和标记
212 ARP 007 The care, maintenance and use of motor vehicle tyres and rims (incorporating TREDCO guidelines)
   机动车轮胎和轮毂的保养与使用
213 VC 8022 Compulsory Specification for motor vehicles of category M1
   M1类机动车的强制性要求
214 VC 8023 Compulsory Specification for motor vehicles of category M2 and M3
   M2和M3类机动车的强制要求
215 VC 8024 Compulsory Specification for motor vehicles of category N1
   N1类机动车的强制性要求
216 VC 8025 Compulsory Specification for motor vehicles of category N2
   and N3
   N2和N3类机动车的强制性要求
217 VC 8026 Compulsory Specification for category O1 and O2 vehicles (caravans and light trailers)
   O1和 O2（旅行拖车和轻型拖车）类机动车的强制性要求
218 VC 8027 Compulsory Specification for category O3 and O4 vehicles (trailers)
   O3和O4（拖车）类机动车的强制性要求
219 VC 8033 Compulsory Specification for child restraints for use in motor vehicles
   机动车儿童约束系统的强制性要求
220 VC 8048 Compulsory Specification for replacement incandescent lamps for motor vehicles
   机动车备用白炽灯的强制性要求
221 VC 8049 Compulsory Specification for replacement headlights for motor vehicles
   机动车备用前照灯的强制性要求
222 VC 8050 Compulsory Specification for replacement secondary lights for motor vehicles
   机动车备用辅助光源的强制性要求
223 VC 8051 Compulsory Specification for replacement safety glass for use in road vehicles
   道路用车备用安全玻璃的强制性要求
224 VC 8053 Compulsory Specification for replacement brake lining assemblies for road vehicles
   道路用车备用制动衬片总成的强制性要求
225 VC 8056 Compulsory Specification for pneumatic tyres for passenger cars and their trailers
   乘用车及其拖车气压轮胎的强制性要求
226 VC 8057 Compulsory Specification for slow speed vehicles
   低速汽车的强制性要求
227 VC 8059 Compulsory Specification for pneumatic tyres for commercial vehicles and their trailers
   商用车及其拖车气压轮胎的强制性要求
228 VC 8062 Compulsory Specification for retro-reflective number plates for motor vehicles
   机动车回复反射牌照的强制性要求
229 VC 8065 Compulsory Specification for ball type couplings and towing brackets for towing caravans and light trailers
   旅行拖车和轻型拖车球型连接装置和拖车支架的强制性要求
230 VC 8078 Compulsory Specification for material for contour marking on motor vehicles
   机动车外形标志材料的强制性要求
231 VC 8080 Compulsory Specification for replacement elastomeric cups and seals for hydraulic brake actuating cylinders for use in motor vehicles using non-petroleum base hydraulic brake fluid (service temperature 70 °C to 150 °C max)
   使用非石油基液压制动液的机动车用液压制动动力气缸的弹性压力封盖和密封件(工作温度70 ℃至150 °C)
232 Standards Act Standards Act, 1993 (Act 29 of 1993)
   标准法1993