DocumentNumber Date Language Title
AGMA 01FTM1 2001.10.01  Carbide Hobbing Case Study
AGMA 01FTM2 2001.10.01  The Ultimate Motion Graph for "Noiseless" Gears
AGMA 01FTM3 2001.10.01  Automated Spiral Bevel Gear Pattern Inspection
AGMA 01FTM4 2001.10.01  How to Inspect Large Cylindrical Gears with an Outside Diameter of More Than 40 Inches
AGMA 01FTM5 2001.10.01  Traceability of Gears - New Ideas, Recent Developments
AGMA 01FTM6 2001.10.01  Performance - Based Gear - Error Inspection, Specification, and Manufacturing - Source Diagnostics
AGMA 01FTM7 2001.10.01  Chemically Accelerated Vibratory Finishing for the Elimination of Wear and Pitting of Alloy Steel Gears
AGMA 01FTM8 2001.10.01  The Effect of Spacing Errors and Runout on Transverse Load Sharing and the Dynamic Factor of Spur and Helical Gears
AGMA 01FTM9 2001.10.01  New opportunities with Molded Gears
AGMA 01FTM10 2001.10.01  Design Techologies of High Speed Gear Transmission
AGMA 01FTM11 2001.10.01  Kinematic and Force Analysis of a Spur Gear System with Separation of Sliding and Rolling between Meshing Profiles
AGMA 01FTMS1 2001.10.01  Optical Technique for Gear Contouring
AGMA 02FTM1 2002.10.01  The Effect of Chemically Accelerated Vibratory Finishing on Gear Metrology
AGMA 02FTM2 2002.10.01  Development and Application of Computer-Aided Design and Tooth Contact Analysis of Spiral-Type Gears with Cylindrical Worms
AGMA 02FTM3 2002.10.01  Application of Statistical Stability and Capability for Gear Cutting Machine Acceptance Criteria
AGMA 02FTM4 2002.10.01  Multibody-System-Simulation of Drive Trains of Wind Turbines
AGMA 02FTM5 2002.10.01  Crack Length and Depth Determination in an Integrated Carburized Gear/Bearing
AGMA 02FTM6 2002.10.01  Contemporary Gear Hobbing - Tools and Process Strategies
AGMA 02FTM7 2002.10.01  Selecting the Best Carburizing Method for the Heat Treatment of Gears
AGMA 02FTM8 2002.10.01  Compliant Spindles in Lapping and Testing Machines
AGMA 02FTM9 2002.10.01  Gear RollScan for High Speed Gear Measurement
AGMA 02FTM10 2002.10.01  Comparison in Rating Trends in AGMA versus ISO
AGMA 02FTM11 2002.10.01  A Gear Design Optimization Procedure that Identifies Robust, Minimum Stress and Minimum Noise Gear Pair Designs
AGMA 02FTMS1 2002.10.01  Design and Stress Analysis of New Version of Novikov-Wildhaber Helical Gears
AGMA 04FTM1 2004.10.01  Gear Noise - Challenge and Success Based on Optimized Gear Geometries
AGMA 04FTM2 2004.10.01  Noise Optimized Modifications: Renaissance of the Generating Grinders?
AGMA 04FTM3 2004.10.01  A Method to Define Profile Modification of Spur Gear and Minimize the Transmission Error
AGMA 04FTM4 2004.10.01  Influence of Surface Roughness on Gear Pitting Behavior
AGMA 04FTM5 2004.10.01  Investigations on the Micropitting Load Capacity of Case Carburized Gears
AGMA 04FTM6 2004.10.01  The Effect of a ZnDTP Anti--wear Additive on Micropitting Resistance of Carburised Steel Rollers
AGMA 04FTM7 2004.10.01  A Short Procedure to Evaluate Micropitting Using the New AGMA Designed Gears
AGMA 04FTM8 2004.10.01  Generalized Excitation of Traveling Wave Vibration in Gears
AGMA 04FTM9 2004.10.01  Design of a High Ratio, Ultra Safe, High Contact Ratio, Double Helical Compound Planetary Transmission for Helicopter Applications
AGMA 04FTM10 2004.10.01  The Failure Investigation and Replacement of a Large Marine Gear
AGMA 04FTM11 2004.10.01  Gear Lubrication as a Reliability Partner
AGMA 04FTM12 2004.10.01  Improved Tooth Load Distribution in an Involute Spline Joint Using Lead Modifications Based on Finite Element Analysis
AGMA 04FTM13 2004.10.01  Superfinishing Motor Vehicle Ring and Pinion Gears
AGMA 04FTMS1 2004.10.01  Stress Analysis of Gear Drives Based on Boundary Element Method
AGMA 05FTM01 2005.10.01  Fine Pitch, Plastic Face Gears: Design and Manufacture
AGMA 05FTM02 2005.10.01  The Effects of Pre Rough Machine Processing on Dimensional Distortion During Carburizing
AGMA 05FTM03 2005.10.01  Modelling Gear Distortion
AGMA 05FTM04 2005.10.01  Tooth Meshing Stiffness Optimisation Based on Gear Tooth Form Determination for a Production Process Using Different Tools
AGMA 05FTM05 2005.10.01  Computerized Design of Face Hobbed Hypoid Gears: Tooth Surfaces Generation, Contact Analysis and Stress Calculation
AGMA 05FTM06 2005.10.01  A Model to Predict Friction Losses of Hypoid Gears
AGMA 05FTM07 2005.10.01  Spiral Bevel and Hypoid Gear Cutting Technology Update
AGMA 05FTM08 2005.10.01  New Developments in Tooth Contact Analysis (TCA) and Loaded TCA for Spiral Bevel and Hypoid Gear Drives
AGMA 05FTM09 2005.10.01  Hypoid Gear Lapping Wear Coefficient and Simulation
AGMA 05FTM10 2005.10.01  Finite Element Study of the Ikona Gear Tooth Profile
AGMA 05FTM11 2005.10.01  Low Loss Gears
AGMA 05FTM12 2005.10.01  Modal Failure Analysis of a Gear and Drive Ring Assembly
AGMA 05FTM13 2005.10.01  Evaluation of the Scuffing Resistance of Isotropic Superfinished Precision Gears
AGMA 05FTM14 2005.10.01  Determining the Shaper Cut Helical Gear Fillet Profile
AGMA 05FTM15 2005.10.01  Repair of Helicopter Gears
AGMA 05FTM16 2005.10.01  CH47D Engine Transmission Input Pinion Seeded Fault Test
AGMA 05FTM17 2005.10.01  Influences of Bearing Life Considerations on Gear Drive Design
AGMA 05FTM18 2005.10.01  Planet Pac: Increasing Epicyclic Power Density and Performance Through Integration
AGMA 05FTM19 2005.10.01  The Application of Very Large, Weld Fabricated, Carburized Hardened & Hard Finished Advanced Technology Gears in Steel
AGMA 05FTM20 2005.10.01  Dual Drive Conveyor Speed Reducer Failure Analysis
AGMA 06FTM01 2006.10.01  The Effects of Super Finishing on Bending Fatigue
AGMA 06FTM02 2006.10.01  Isotropic Superfinishing of S--76C+ Main Transmission Gears
AGMA 06FTM03 2006.10.01  Detailed Procedure for the Optimum Design of an Epicyclic Transmission Using Plastic Gears
AGMA 06FTM04 2006.10.01  Precision Planetary Servo Gearheads
AGMA 06FTM05 2006.10.01  Development of a Gear Rating Standard - A Case Study of AGMA 6014--A06
AGMA 06FTM06 2006.10.01  An Analytical Approach to the Prediction of Micropitting on Case Carburised Gears
AGMA 06FTM07 2006.10.01  Improvement of Standardized Test Methods for Evaluating the Lubricant Influence on Micropitting and Pitting Resistance of Case Carburized Gears
AGMA 06FTM08 2006.10.01  An Evaluation of FZG Micropitting Test Procedures and Results for the Crowned AGMA Test Gears
AGMA 06FTM09 2006.10.01  Opportunities to Replace Wrought Gears with High Performance PM Gears in Automotive Applications
AGMA 06FTM10 2006.10.01  Fabrication, Assembly and Test of a High Ratio, Ultra Safe, High Contact Ratio, Double Helical Planetary Transmission for Helicopter Applications
AGMA 06FTM11 2006.10.01  On Tooth Failure Analysis in Small--Teeth--Number Gearing: An Analytical Approach
AGMA 06FTM12 2006.10.01  A Crane Gear Failure Analysis -- Case Study, Observations, Lessons Learned, Recommendations
AGMA 06FTM13 2006.10.01  Economic Aspects of Vacuum Carburizing
AGMA 06FTM14 2006.10.01  The Optimal High Speed Cutting of Bevel Gears -- New Tools and New Cutting Parameters
AGMA 06FTM15 2006.10.01  Optimal Tooth Modifications in Spiral Bevel Gears Introduced by Machine Tool Setting Variation
AGMA 06FTM16 2006.10.01  Certificate for Involute Gear Evaluation Software
AGMA 07FTM01 2007.10.01  Estimation of Lifetime for Plastic Gears
AGMA 07FTM02 2007.10.01  Study of the Correlation Between Theoretical and Actual Gear Fatigue Test Data on a Polyamide
AGMA 07FTM03 2007.10.01  Material Integrity in Molded Plastic Gears and its Dependence on Molding Practices
AGMA 07FTM04 2007.10.01  Applying Elemental Gear Measurement to Mold Modification of Molded Plastic Gears
AGMA 07FTM05 2007.10.01  Vacuum Carburizing System for Powder Metal Parts and Components
AGMA 07FTM06 2007.10.01  Using Barkhausen Noise Analysis for Process and Quality Control in the Production of Gears
AGMA 07FTM07 2007.10.01  Grinding Induced Changes in Residual Stresses of Carburized Gears
AGMA 07FTM08 2007.10.01  Manufacturing Net Shaped Cold Formed Gears
AGMA 07FTM09 2007.10.01  The Ikona Clutch and Differential
AGMA 07FTM10 2007.10.01  The Gear Dynamic Factor, Historical and Modern Perspectives
AGMA 07FTM11 2007.10.01  Helicopter Accessory Gear Failure Analysis Involving Wear and Bending Fatigue
AGMA 07FTM12 2007.10.01  The Effect of Start--Up Load Conditions on Gearbox Performance and Life -- Failure Analysis and Case Study
AGMA 07FTM13 2007.10.01  Influence of Grinding Burn on the Load Carrying Capacity of Parts Under Rolling Stress
AGMA 07FTM14 2007.10.01  Roughness and Lubricant Chemistry Effects in Micropitting
AGMA 07FTM15 2007.10.01  Experience with a Disc Rig Micropitting Test
AGMA 07FTM16 2007.10.01  Straight Bevel Gear Cutting and Grinding on CNC Free Form Machines
AGMA 07FTM17 2007.10.01  Simulation Model for the Emulation of the Dynamic Behavior of Bevel Gears
AGMA 07FTM18 2007.10.01  Bevel Gear Model
AGMA 07FTM19 2007.10.01  How to Determine the MTBF of Gearboxes
AGMA 08FTM01 2008.10.01  Parametric Study of the Failure of Plastic Gears
AGMA 08FTM02 2008.10.01  A Methodology for Identifying Defective Cycloidal Reduction Components Using Vibration Analysis and Techniques
AGMA 08FTM03 2008.10.01  Effects of Gear Surface Parameters on Flank Wear
AGMA 08FTM04 2008.10.01  The Effect of Manufacturing Microgeometry Variations on the Load Distribution Factor and on Gear Contact and Root Stresses
AGMA 08FTM05 2008.10.01  Gear Failure Analysis Involving Grinding Burn
AGMA 08FTM06 2008.10.01  Tooth Fillet Profile Optimization for Gears with Symmetric and Asymmetric Teeth
AGMA 08FTM07 2008.10.01  Planetary Gearset Lubrication Requirement Estimation Based on Heat Generation
AGMA 08FTM08 2008.10.01  PM Materials for Gear Applications
AGMA 08FTM09 2008.10.01  Concept for a Multi Megawatt Wind Turbine Gear and Field Experience
AGMA 08FTM10 2008.10.01  The Effect of Superfinishing on Gear Micropitting, Part II
AGMA 08FTM11 2008.10.01  Bending Fatigue Tests of Helicopter Case Carburized Gears: Influence of Material, Design and Manufacturing Parameters
AGMA 08FTM12 2008.10.01  In-situ Measurement of Stresses in Carburized Gears via Neutron Diffraction
AGMA 08FTM13 2008.10.01  Hydrogen and Internal Residual Stress Gear Failures - Some Failure Analyses and Case Studies
AGMA 08FTM14 2008.10.01  Effects of Axle Deflection and Tooth Flank Modification on Hypoid Gear Stress Distribution and Contact Fatigue Life
AGMA 08FTM15 2008.10.01  Extending the Benefits of Elemental Gear Inspection
AGMA 08FTM16 2008.10.01  Hob Tool Life Technology Update
AGMA 08FTM17 2008.10.01  Innovative Concepts for Grinding Wind Power Energy Gears
AGMA 08FTM18 2008.10.01  Gear Corrosion During the Manufacturing Process
AGMA 08FTM19 2008.10.01  How Are You Dealing with the Bias Error in Your Helical Gears?
AGMA 09FTM01 2009.09.01  Influence of the Residual Stresses Induced by Hard Finishing Processes on the Running Behavior of Gears
AGMA 09FTM02 2009.09.01  Implementing ISO 18653, Gears - Evaluation of Instruments for the Measurement of Individual Gears
AGMA 09FTM03 2009.09.01  Producing Profile and Lead Modifications in Threaded Wheel and Profile Grinding
AGMA 09FTM04 2009.09.01  New Developments in Gear Hobbing
AGMA 09FTM05 2009.09.01  Hypoloid Gears with Small Shaft Angles and Zero to Large Offsets
AGMA 09FTM06 2009.09.01  Dependency of the Peak-to-Peak-Transmission-Error on the Type of Profile Correction and the Transverse Contact Ratio of the Gear Pair
AGMA 09FTM07 2009.09.01  Optimizing Gear Geometry for Minimum Transmission Error, Mesh Friction Losses and Scuffing Risk Through Computer Aided Engineering
AGMA 09FTM08 2009.09.01  Load Sharing Analysis of High Contact Ratio Spur Gears in Military Tracked Vehicle Application
AGMA 09FTM09 2009.09.01  Designing for Static and Dynamic Loading of a Gear Reducer Housing with FEA
AGMA 09FTM10 2009.09.01  The Effect of Flexible Components on the Durability, Whine, Rattle, and Efficiency of an Automotive Transaxle Geartrain System
AGMA 09FTM11 2009.09.01  Unique Design Constraints for Molded Plastic Transmissions
AGMA 09FTM12 2009.09.01  The Anatomy of a Micropitting Induced Tooth Fracture Failure - Causation, Initiation, Progression and Prevention
AGMA 09FTM13 2009.09.01  Bending Fatigue, Impact and Pitting Resistance of Ausform Finished P/M Gears
AGMA 09FTM14 2009.09.01  Design, Development and Application of New High-Performance Gear Steels
AGMA 09FTM15 2009.09.01  High Performance Industrial Gear Lubricants for Optimal Reliability
AGMA 09FTM16 2009.09.01  Allowable Contact Stresses in Jacking Gear Units Used in the Offshore Industry
AGMA 09FTM17 2009.09.01  Variation Analysis of Tooth Engagement and Load-Sharing in Involute Splines
AGMA 09FTM18 2009.09.01  Does the Type of Gear Action Affect the Appearance of Micropitting and Gear Life?
AGMA 09FTM19 2009.09.01  The Effect of Gearbox Architecture on Wind Turbine Enclosure Size
AGMA 88FTM13 1988.10.01  The Development of a Variable center Distance Gear Noise Test Facility
AGMA 90FTM1 1990.10.01  Contact Stresses in Gear Teeth
AGMA 90FTM2 1990.10.01  An Industrial Approach for Load Capacity Calculation of Worm Gears (Verifying and Design)
AGMA 90FTM3 1990.10.01  Simulation of Meshing, Transmission Errors and Bearing Contact for Single-Enveloping Worm-Gear Drives
AGMA 90FTM4 1990.10.01  Different Types of Wear- How to Classify?
AGMA 90FTM5 1990.10.01  POLISHING WEAR
AGMA 90FTM6 1990.10.01  Dynamic Responses of Aircraft Gears
AGMA 90FTM7 1990.10.01  Advanced Rotorcraft Transmission Program - A Status Review
AGMA 90FTM8 1990.10.01  Investigations on the Scuffing Resistance of High-Speed Gears
AGMA 90FTM9 1990.10.01  A Procedure That Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears
AGMA 90FTM10 1990.10.01  The Mechanism of Failure With and Without Titatanium Nitride Coating in Roller Tests
AGMA 90FTM11 1990.10.01  Multiple Iteration- Respectable Trial-and-Error
AGMA 90FTM12 1990.10.01  Design of New Systems of Controlled Speed Drives
AGMA 90FTM13 1990.10.01  Face Milling or Face Hobbing
AGMA 90FTM14 1990.10.01  A Closed and Fast Solution Formulation for Practice Oriented Optimization of Real Spiral Bevel and Hypoid Gear Flank Geometry
AGMA 90FTM15 1990.10.01  Optimal Design of Straight Bevel Gears
AGMA 90FTMS1 1990.10.01  Kinematic Analysis of Transmissions - Based on the Finite Element Method
AGMA 91FTM1 1991.10.01  CNC Bevel Gear Generators and Flared Cup Formate Gear Grinding
AGMA 91FTM2 1991.10.01  CNC Technology and New Calculation Methods Permit Efficient System Independent Manufacturing of Spiral Bevel Gears
AGMA 91FTM3 1991.10.01  High Efficiency Gear Hobbing
AGMA 91FTM4 1991.10.01  Low Noise Marine Gears
AGMA 91FTM5 1991.10.01  Machine Tool Condition Monitoring
AGMA 91FTM6 1991.10.01  Comparing Surface Failure Modes in Bearings and Gears: Appearances versus Mechanisms
AGMA 91FTM7 1991.10.01  Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth
AGMA 91FTM8 1991.10.01  Methods of Statistical Dynamics for the Calculation of Gear Stress Distribution and its Effect on Gear Failure Probability
AGMA 91FTM9 1991.10.01  Rerating Damaged Naval Ship Propulsion Gears
AGMA 91FTM10 1991.10.01  Dynamic Measurements of Gear Tooth Friction and ****
**** 91FTM11 1991.10.01  Initial Design of Gears Using Artificial Neural Net
AGMA 91FTM12 1991.10.01  The Combined Mesh Stiffness Characteristics of Straight and Spiral Bevel Gears
AGMA 91FTM13 1991.10.01  Separation of Lubrication and Cooling in Oil-Jet Lubricated Gears
AGMA 91FTM14 1991.10.01  The Effect of Thermal Shrink and Expansion on Plastic Gear Geometry
AGMA 91FTM15 1991.10.01  Gear Hardness Technology
AGMA 91FTM16 1991.10.01  Contact Analysis of Gears Using a Combined Finite Element and Surface Integral Method
AGMA 91FTM17 N/A  The Influence of Lubrication on the Onset of Surface Pitting in Machinable Hardness Gear Teeth
AGMA 91FTMS1 1991.10.01  Finite Element Stress Analysis of a Genetic Spur Gear Tooth
AGMA 92FTM1 1992.10.01  Experimental Characterization of Surface Durability of Materials for Worm Gears
AGMA 92FTM2 1992.10.01  Face Gear Drives: Design, Analysis, and Testing for Helicopter Transmission Applications
AGMA 92FTM3 1992.10.01  Reduced Fuel Consumption and Emissions due to Better Integration of Engine and Transmission
AGMA 92FTM4 1992.10.01  The Design, Development and Manufacture of Advanced Technology Gearing for Hot Strip Rolling Mill Applications
AGMA 92FTM5 1992.10.01  Main Advantages of Non-Involute Spur Gears: The Design of Non-Involute Spur Gears to Improve the Condition of Contact
AGMA 92FTM6 1992.10.01  Comparison of Carburized Gear Materials in Pitting
AGMA 92FTM7 1992.10.01  Difference in the Local Stress of the Gear Tooth Root Based On Hobbing Cutters and Pinion Cutters
AGMA 92FTM8 1992.10.01  The Role of Reliability for Bearings and Gears
AGMA 92FTM9 1992.10.01  Representative Form Accuracy of Gear Tooth Flanks on the Prediction of Vibration and Noise of Power Transmission
AGMA 92FTM10 1992.10.01  The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
AGMA 92FTM11 1992.10.01  New Findings on the Loading of Plastic Spur Gear Teeth
AGMA 92FTM12 1992.10.01  Noise Reduction in a Plastic and Powder Metal Gear Set Through Control of "Mean Involute Slope"
AGMA 93FTM1 1993.10.01  Undercutting in Worms and Worm-Gears
AGMA 93FTM2 1993.10.01  Topological Tolerancing of Worm-Gear Tooth surfaces
AGMA 93FTM3 1993.10.01  A Rayleigh-Ritz Approach to Determine Compliance and Root Stresses in Spiral Bevel Gears Using Shell Theory
AGMA 93FTM4 1993.10.01  Stress Analysis of Spiral Bevel Gears A Novel Approach to Tooth Modelling
AGMA 93FTM5 1993.10.01  Optimal Gear Design for Equal Strength Teeth Using Addendum Modification Coefficients
AGMA 93FTM6 1993.10.01  Effect of Radial Runout on Element Measurements
AGMA 93FTM7 1993.10.01  New Developments in Design, Manufacturing and Applications of Cylkro-(Face) Gears
AGMA 93FTM8 1993.10.01  Single Flank Testing and Structure-Born Noise Analysis
AGMA 93FTM9 1993.10.01  Gear Tooth Bending Fatigue Crack Detection by Acoustic Emissions and Tooth Compliance Measurements
AGMA 93FTM10 1993.10.01  High Speed, Heavily Loaded and Precision Aircraft Type Epicyclic Gear System Dynamic Analysis by Using AGMA Gear Design Guidelines Enhanced by Exact Definition of Dynamic Loads
AGMA 93FTM11 1993.10.01  The Relative Noise Levels of Parallel Axis Gear Sets with Various Contact Ratios and Gear Tooth Forms
AGMA 93FTM12 1993.10.01  The Generation of Precision Spur Gears Through Wire Electrical Discharge Machining
AGMA 93FTM13 1993.10.01  CAGE- Computer Aided Gear Engineering Software
AGMA 93FTMS1 1993.10.01  Spur Gear Bending Strength Geometry Factors: A Comparison of AGMA and ISO Methods
AGMA 94FTM1 1994.10.01  Fatigue Analysis of Shafts for Marine Gearboxes
AGMA 94FTM2 1994.10.01  Analytical Method for the Calculation of the Efficiency of Planetary Gears
AGMA 94FTM3 1994.10.01  Application of Ausforming to Gear Finishing - Process, Design and Manufacturability Issues
AGMA 94FTM4 1994.10.01  Load Carrying Capacity of Nitrided Gears
AGMA 94FTM5 1994.10.01  Special CVT for a New Power Train Concept
AGMA 94FTM6 1994.10.01  Boundary Element Procedure for Predicting Helical Gear Root Stresses and Load Distribution Factors
AGMA 94FTM7 1994.10.01  Allowable Surface Compressive Stresses of Gear Teeth Made of Cast Iron, Tempered Carbon Steels and Tempered Alloys Steels
AGMA 94FTM8 1994.10.01  Reference Point, Mesh Stiffness and Dynamic Behavior of Solid, Semi-Solid and Thin Rimmed Spur Gears
AGMA 94FTM9 1994.10.01  Analytical and Experimental Vibration Analysis of a Damaged Gear
AGMA 94FTM10 1994.10.01  Computerized Design and Generation of Low-Noise Gears with Localized Bearing Contact
AGMA 94FTM11 1994.10.01  Development of Transfer Gear Noise of 4X4 Transmission for Recreational Vehicles
AGMA 94FTMS1 1994.10.01  Computer-Aided Numerical Determination of Hofer, Lewis, Niemann and Colbourne Points
AGMA 95FTM1 1995.10.01  Detection of "Hidden Runout"
AGMA 95FTM2 1995.10.01  Separation of Runout from Elemental Inspection Data
AGMA 95FTM3 1995.10.01  Effect of Manufacturing Errors on the Predicted Dynamic Factors of Spur Gears
AGMA 95FTM4 1995.10.01  Experimental Test Stand to Measure Loaded Transmission Error in Fine-Pitch Plastic Gears
AGMA 95FTM5 1995.10.01  Surface Fatigue Life of Contour Induction Hardened AISI 1552 Gears
AGMA 95FTM6 1995.10.01  Development of an Epicyclic Gearbox for Reduced Sub-Synchronous Vibrations in Gas Turbo-Generator Sets
AGMA 95FTM7 1995.10.01  Experimental and Analytical Assessment of the Thermal Behavior of Spiral Bevel Gears
AGMA 95FTM8 1995.10.01  Miner's Rule - A More Definitive Approach
AGMA 95FTM9 1995.10.01  Bending and Compressive Stress Analysis of External Helical Gearsets of Varying Contact Ratios
AGMA 95FTM10 1995.10.01  Efficiency of High Contact Ratio Planetary Gear Trains
AGMA 95FTM11 1995.10.01  Feature-Based Definition of Bevel Gears
AGMA 95FTM12 1995.10.01  Flank Modifications in Bevel Gears Using a Universal Motion Concept
AGMA 95FTM13 1995.10.01  Powder Metallurgy Gears - Expanding Opportunities
AGMA 95FTM14 1995.10.01  Study of Effect of Machining Parameters on Performance of Worm Gears
AGMA 95FTMS1 1995.10.01  Determination of the Dynamic Gear Meshing Stiffness of an Acetal Copolymer
AGMA 96FTM1 1996.10.01  Computer Based Approach Aimed at Reproducing Master Spiral Bevel and Hypoid Pinions and Gears
AGMA 96FTM2 1996.10.01  New Way of Manufacturing Bevel and Hypoid Gears in a Continuous Process
AGMA 96FTM3 1996.10.01  Noise Reduction Through Generated Engagement Relief Modification
AGMA 96FTM4 1996.10.01  Traceable Calibration of Master Gears at PTB
AGMA 96FTM5 1996.10.01  Differential Crowning: A New Weapon Against Gear Noise and Dynamic ****
**** 96FTM6 1996.10.01  F-22 AMAD Gear Drive - Optimization of Resonance Characteristics by Detuning, Coulomb Damping & Damped Force Response Analyses
AGMA 96FTM7 1996.10.01  Dynamic Distribution of Load and Stress on External Involute Gearings
AGMA 96FTM8 1996.10.01  Thermal Rating of Gear Drives Balance Between Power Loss and Heat Dissipation
AGMA 96FTM9 1996.10.01  Development of a Practical Thermal Rating Method for Enclosed Gear Drives
AGMA 96FTM10 1996.10.01  Scuffing Resistance of Vehicle Transmission Gears
AGMA 96FTM11 1996.10.01  DIN 3996: A New Standard for Calculating the Load Capacity of Worm Gears
AGMA 96FTM12 1996.10.01  Investigation of Globoidal Wormgear Drives
AGMA 97FTM1 1997.11.01  Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
AGMA 97FTM2 1997.11.01  Determining Sound Power Levels of Enclosed Gear Drives Using the Sound Intensity Method
AGMA 97FTM3 1997.11.01  Detection of Fatigue Cracks in Gears with the Continuous Wavelet Transform
AGMA 97FTM4 1997.11.01  Measurement and Predictions of Plastic Gear Transmission Errors with Comparisions to the Measured Noise of Plastic and Steel Gears
AGMA 97FTM5 1997.11.01  Improved Finite Element Model for Calculating Stresses in Bevel and Hypoid Gear Teeth
AGMA 97FTM6 1997.11.01  On the Location of the Tooth Critical Section for the Determination of the AGMA J - Factor
AGMA 97FTM7 1997.11.01  Bending Load on Internal Gears of Planetary Gear Sets
AGMA 97FTM8 1997.11.01  New Guidelines for Wind Turbine Gearboxes
AGMA 97FTM9 1997.11.01  Relations Between Wear and Pitting Phenomena in Worm Gears
AGMA 97FTM10 1997.11.01  UltraSafe Gear Systems for Critical Applications - Initial Development
AGMA 97FTM11 1997.11.01  Non - Dimensional Characterization of Gear Geometry, Mesh Loss and Windage
AGMA 97FTM12 1997.11.01  Introduction of a Jobbing System for Bevel and Hypoid Gears
AGMA 97FTM13 1997.11.01  Three Innovations Advance the Science of Shot Peening
AGMA 97FTM14 1997.11.01  Refinements in Root Stress Predications for Edges of Helical Gear Teeth
AGMA 97FTM15 1997.11.01  Design, Generation, Stress Analysis and Test of Low-Noise, Increased Strength Face - Milled Spiral Bevel Gears
AGMA 97FTMS1 1997.11.01  Coordinate Measurement and Reverse Engineering of ZK Type Worm Gearing
AGMA 98FTM1 1998.10.01  Method for Predicting the Dynamic Root Stresses of Helical Gear Teeth
AGMA 98FTM2 1998.10.01  Mesh Friction in Gearing
AGMA 98FTM3 1998.10.01  Basic Studies on Fatigue Strength of Case-Hardened Gear Steel - Effects of Shot Peening and/or Barrelling Processes
AGMA 98FTM4 1998.10.01  Effect of Uncontrolled Heat Treat Distortion on the Pitting Life of Ground, Carburized and Hardened Gears
AGMA 98FTM5 1998.10.01  Low Vibration Design on a Helical Gear Pair
AGMA 98FTM6 1998.10.01  Calibration of Master Gears on Coordinate Measurement Machines
AGMA 98FTM7 1998.10.01  Checker of 3D Form Accuracy of Hypoid & Bevel Gear Teeth for the new Generation and Quality Control
AGMA 98FTM8 1998.10.01  New Test Methods for the Evaluation of Wear, Scuffing and Pitting Capacity of Gear Lubricants
AGMA 98FTM9 1998.10.01  Studies on Improvement of Surface Durability of Case-Carburized Steel Gear - Effects of Surface Finish Processes upon Oil Film Formation
AGMA 98FTM10 1998.10.01  Local Coefficients of Friction in Worm Gear Contacts
AGMA 98FTM11 1998.10.01  Improving Pump Gear Geometry Through Secondary Gear Tooth Finishing
AGMA 98FTM12 1998.10.01  Gear Refurbishment, an Economical Approach for Aerospace Overhaul & Repair
AGMA 99FTM1 1999.10.01  Barkhausen Noise Inspection Method for Detecting Grinding Damage in Gears
AGMA 99FTM2 1999.10.01  Traceability Strategies for the Calibration of Involute Spline Gauges
AGMA 99FTM3 1999.10.01  Measurement Uncertainty for Pitch and Runout Artifacts
AGMA 99FTM4 1999.10.01  Gear Oil Micropitting Evaluation
AGMA 99FTM5 1999.10.01  Analysis of Micropitting on Prototype Surface Fatigue Test Gears
AGMA 99FTM6 1999.10.01  Submerged Induction Hardening of Gears
AGMA 99FTM7 1999.10.01  Ductile Iron as a Gear Material
AGMA 99FTM8 1999.10.01  Power-Dry-Cutting of Bevel Gears
AGMA 99FTM9 1999.10.01  Dry Hobbing Process Technology Road Map
AGMA 99FTM10 1999.10.01  Design and Testing of a Low Noise Marine Gear
AGMA 99FTM11 1999.10.01  Performance of Nitrided Gears in High Speed Epicyclic Gearbox Used in Gas Turbogenerators - a Case Study
AGMA 99FTM12 1999.10.01  Gearbox Field Performance from a Rebuilder's Perspective
AGMA 99FTM13 1999.10.01  Failures of Bevel-Helical Gear Units on Traveling Bridge Cranes
AGMA 99FTM14 1999.10.01  Effect of Material Defects on Gear Performance - a Case Study
AGMA 99FTM15 1999.10.01  Theoretical Model for Load Distribution on Cylindric Gears: Application to Contact Stress Analysis
AGMA 99FTM16 1999.10.01  Multi-Objective Optimization of Nonstandard Gears Including Robustness
AGMA 99FTM17 1999.10.01  Synthetic Oils for Worm Gear Lubrication
AGMA 99FTM18 1999.10.01  Effects of Wear on the Meshing Contact of Worm Gearing
AGMA 99FTMS1 1999.10.01  Modeling and Measurement of Sliding Friction for Gear Analysis
AGMA 900-H06 2006.08.22  Style Manual for the Preparation of Standards, Information Sheets and Editorial Manuals
AGMA 901-A92 1992.01.01  Rational Procedure for the Preliminary Design of Minimum Volume Gears
AGMA 904-C96 1996.10.28  Metric Usage
AGMA 908-B89 1989.04.01  Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth - Revision of AGMA 226.01
AGMA 909-A06 2006.07.18  Specifications for Molded Plastic Gears
AGMA 910-C90 1990.06.01  Formats for Fine-Pitch Gear Specification Data - Revision of 114.02
AGMA 911-A94 1994.01.01  Design Guidelines for Aerospace Gearing - Replaces AGMA 411.02
AGMA 912-A04 2004.10.23  Mechanisms of Gear Tooth Failures
AGMA 913A 1998.03.13  Method for Specifying the Geometry of Spur and Helical Gears
AGMA 914-B04 2004.03.04  Gear Sound Manual Part I - Fundamentals of Sound as Related to Gears Part II - Sources, Specifications and Levels of Gear Sound Part III - Gear Noise Control - Replaces AGMA 299.01
AGMA 915-1-A02 2002.04.16  Inspection Practices - Part 1: Cylindrical Gears - Tangential Measurements
AGMA 915-2-A05 2005.05.03  Inspection Practices - Part 2: Cylindrical Gears - Radial Measurements
AGMA 915-3A 1999.05.20  Inspection Practices - Gear Blanks, Shaft Center Distance and Parallelism - ISO/TR 10064-3: 1996 (MOD)
AGMA 917-B97 1997.09.25  Design Manual for Parallel Shaft Fine-Pitch Gearing
AGMA 918-A93 1993.01.01  Summary of Numerical Examples Demonstrating the Procedures for Calculating Geometry Factors for Spur and Helical Gears
AGMA 920-A01 2001.01.01  Materials for Plastic Gears
AGMA 922-A96 1996.09.18  Load Classification and Service Factors for Flexible Couplings - Revision of 514.02
AGMA 923-B05 2005.05.03  Metallurgical Specifications for Steel Gearing
AGMA 925-A03 2003.03.13  Effect of Lubrication on Gear Surface Distress
AGMA 926C 1999.05.20  Recommended Practice for Carburized Aerospace Gearing - Replaces AGMA 246.02a-1983
AGMA 927-A01 2001.01.01  Load Distribution Factors - Analytical Methods for Cylindrical Gears
AGMA 929-A06 2006.08.22  Calculation of Bevel Gear Top Land and Guidance on Cutter Edge Radius
AGMA 930-A05 2005.01.19  Calculated Bending Load Capacity of Powder Metallurgy (P/M) External Spur Gears
AGMA 932-A05 2005.01.19  Rating the Pitting Resistance and Bending Strength of Hypoid Gears
AGMA 933-B03 2003.01.01  Basic Gear Geometry
AGMA 935-A05 2005.10.16  Recommendations Relative to the Evaluation of Radial Composite Gear Double Flank Testers
AGMA 938-A05 2005.05.03  Shot Peening of Gears
AGMA 939-A07 2007.01.31  Austempered Ductile Iron for Gears
AGMA 1003-H07 2007.01.01  Tooth Proportions for Fine- Pitch Spur and Helical Gearing
AGMA 1006-A 1997.08.07  Tooth Proportions for Plastic Gears
AGMA 1010-E95 1995.03.09  Appearance of Gear Teeth - Terminology of Wear and Failure - Revision of 110.04
AGMA 1012-G05 2005.09.29  Gear Nomenclature, Definitions of Terms with Symbols
AGMA 1102-A03 2003.12.11  Tolerance Specification for Gear Hobs
AGMA 1103-H07 2007.01.01  Tooth Proportions for Fine- Pitch Spur and Helical Gearing (Metric Edition)
AGMA 1106-A 1997.08.07  Tooth Proportions for Plastic Gears - Metric Edition of 1006-A
AGMA 2000FTM1 2000.10.01  Minimization of In-Process Corrosion of Aerospace Gears
AGMA 2000FTM2 2000.10.01  Calculation of Optimum Surface Carbon Content for Carburized Case Hardened Gears
AGMA 2000FTM3 2000.10.01  Comparison of New Gear Metallurgy Documents, ISO 6336-5 and AGMA 923 with Gear Rating Standards AGMA 2001 and 2003
AGMA 2000FTM4 2000.10.01  Parametric Influences in the ISO Project Concerning Worm Gear Rating
AGMA 2000FTM5 2000.10.01  Systematic Investigations on the Influence of Viscosity Index Improvers on EHL-Film Thickness
AGMA 2000FTM6 2000.10.01  Did the Natural Convection Exist in Mechanical Power Transmissions? Theoretical and Experimental Results
AGMA 2000FTM7 2000.10.01  Analytical - FEM Tool for the Design and Optimization of Aerospace Gleason Spiral Bevel Gears
AGMA 2000FTM8 2000.10.01  Stock Distribution Optimization in Fixed Setting Hypoid Pinions
AGMA 2000FTM9 2000.10.01  Cylindrical and Bevel Gear Inspection - a Simple Task Using Dedicated CNC - Controlled Gear Inspection Machines
AGMA 2000FTM10 2000.10.01  Bending Fatigue Investigation under Variable Load Conditions on Case Carburized Gears
AGMA 2000FTM11 2000.10.01  UltraSafe Gear Systems - Single Tooth Bending Fatigue Test Results
AGMA 2000FTM12 2000.10.01  Finite Strips Methods as an Alternative to the Finite Elements in Gear Tooth Stress and Strain Analysis
AGMA 2000FTMS1 2000.10.01  Effects of Helix Slope and Form Deviation on the Contact and Fillet Stresses of Helical Gears
AGMA 2001-D04 2004.12.28  Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth
AGMA 2002-B88 1988.10.01  Tooth Thickness Specification and Measurement - Errata - 1995
AGMA 2003-B97 1997.01.01  Rating the Pitting Resistance and Bending Strength of Generated Straight Bevel, Zerol Bevel, and Spiral Bevel Gear Teeth
AGMA 2004-C08 2008.01.01  Gear Materials, Heat Treatment and Processing Manual
AGMA 2005-D03 2003.01.01  Design Manual for Bevel Gears
AGMA 2007-C00 2000.03.02  Gears - Surface Temper Etch Inspection After Grinding - ISO 14104: 1995, IDT
AGMA 2008-C01 2001.11.01  Assembling Bevel Gears - Revision of AGMA 331.01; Includeds Errata: June 1995 and Errata: October 2001
AGMA 2009-B01 2001.01.01  Bevel Gear Classification, Tolerances, and Measuring Methods - Errata: October 2001
AGMA 2011-A98 1998.06.01  Cylindrical Wormgearing Tolerance and Inspection Methods - Replacement of AGMA 390.03a
AGMA 2015-1-A01 2001.08.01  Accuracy Classification System - Tangential Measurements for Cylindrical Gears - Replaces 2000-A88
AGMA 2015-2-A06 2006.06.22  Accuracy Classification System - Radial Measurements for Cylindrical Gears
AGMA 2015/915-1-A02 SUPP 2002.10.20  Accuracy Classification System- Tangential Measurement Tolerance Tables for Cylindrical Gears - Supplemental Tables for AGMA 2015/915-1-A02
AGMA 2101-D04 2004.12.28  Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth - Metric Edition of 2001-C95
AGMA 2111-A98 1998.10.01  Cylindrical Wormgearing Tolerance and Inspection Methods (Metric) - Metric Edition of ANSI/AGMA 2011-A98
AGMA 2116-A05 2005.01.01  Evaluation of Double Flank Testers for Radial Composite Measurement of Gears
AGMA 6000-B96 1996.06.01  Specification for Measurement of Linear Vibration on Gear Units
AGMA 6001-E08 2008.12.19  Design and Selection of Components for Enclosed Gear Drives
AGMA 6002-B93 1993.01.01  Design Guide for Vehicle Spur and Helical Gears - Revision of AGMA 170.01
AGMA 6006-A03 2003.01.01  Standard for Design and Specification of Gearboxes for Wind Turbines - Supersedes AGMA 921-A97
AGMA 6008-A98 1998.01.01  Specifications for Powder Metallurgy Gears
AGMA 6011-I03 2003.01.01  Specification for High Speed Helical Gear Units
AGMA 6013-A06 2006.04.25  Standard for Industrial Enclosed Gear Drives
AGMA 6014-A06 2006.10.18  Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment
AGMA 6022-C93 1993.01.01  Design Manual for Cylindrical Wormgearing - Revision of AGMA 341.02
AGMA 6025-D98 1998.03.01  Sound for Enclosed Helical, Herringbone and Spiral Bevel Gear Drives - Revision of 6025-C90
AGMA 6032-A94 1994.08.23  Standard for Marine Gear Units: Rating
AGMA 6033-C08 2008.09.29  Materials for Marine Propulsion Gearing
AGMA 6034-B92 1992.01.01  Practice for Enclosed Cylindrical Wormgear Speed Reducers and Gearmotors
AGMA 6035-A02 2002.01.01  Design, Rating and Application of Industrial Globoidal Wormgearing - Supersedes ANSI/AGMA 6030-C87 and ANSI/AGMA 6017-E86
AGMA 6101-E08 2008.12.31  Design and Selection of Components for Enclosed Gear Drives (Metric Edition) - Metric Edition of ANSI/AGMA 6001-E08
AGMA 6113-A06 2006.04.26  Standard for Industrial Enclosed Gear Drives (Metric Edition)
AGMA 6114-A06 2006.01.01  Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment (Metric Edition) - Metric Edition of ANSI/AGMA 6014-A06
AGMA 6123-B06 2006.09.20  Design Manual for Enclosed Epicyclic Gear Drives
AGMA 6133-C08 2008.09.25  Materials for Marine Propulsion Gearing (Metric Edition)
AGMA 6135-A02 2002.01.01  Design, Rating and Application of Industrial Globoidal Wormgearing - Supersedes ANSI/AGMA 6030-C87 and ANSI/AGMA 6017-E86
AGMA 9000-C90 1990.02.01  Flexible Couplings - Potential Unbalance Classification - Revision of 515.02
AGMA 9001-B97 1997.01.01  Flexible Couplings-Lubrication
AGMA 9002-B04 2004.01.01  Bores and Keyways for Flexible Couplings (Inch Series)
AGMA 9003-B08 2008.05.20  Flexible Couplings -- Keyless Fits
AGMA 9004-B08 2008.12.19  Flexible Couplings - Mass Elastic Properties and Other Characteristics
AGMA 9005-E02 2002.01.01  Industrial Gear Lubrication - Supersedes AGMA 250.04 and AGMA 251.02
AGMA 9008-B00 2000.01.01  Flexible Couplings - Gear Type - Flange Dimensions, Inch Series - Revision of AGMA 516.01
AGMA 9009-D02 2002.06.27  Flexible Couplings - Nomenclature for Flexible Couplings - Revision of AGMA 510.03
AGMA 9103-B08 2008.05.20  Flexible Couplings - Keyless Fits (Metric Edition)
AGMA 9104-A06 2006.12.18  Flexible Couplings - Mass Elastic Properties and Other Characteristics (Metric Edition) - Metric Edition of ANSI/AGMA 9004-A99
AGMA 9112-A04 2004.01.01  Bores and Keyways for Flexible Couplings (Metric Series)
AGMA ISO 6336-6-A08 2008.05.20  Calculation of Load Capacity of Spur and Helical Gears - Part 6: Calculation of Service Life Under Variable ****
**** ISO 10064-5-A06 2006.07.18  Code of Inspection Practice - Part 5: Recommendations Relative to Evaluation of Gear Measuring Instruments
AGMA ISO 14179-1 2004.03.04  Gear Reducers - Thermal Capacity Based on ISO/TR 14179-1 - ISO/TR 14179-1:2001(Mod)
AGMA ISO 17485-A08 SUPP 2008.01.01  Bevel Gears - ISO System of Accuracy - Tolerance Tables
AGMA ISO 17485-A08 2008.05.20  Bevel Gears - ISO System of Accuracy
AGMA ISO 18653-A06 2006.09.29  Gears - Evaluation of Instruments for the Measurement of Individual Gears
AGMA ISO 23509-A08 2008.05.20  Bevel and Hypoid Gear Geometry

注： 行业标准整套全部都可以提供，如需要订购单个标准，请联系我们。
联系方式QQ：865686303  1134131839
E-mail:china_isovip@126.com
 
本店收录国内外标准超过50万条，包括：国家标准，行业标准，部标，国际标准，美国标准 ，欧洲标准，英国

标准，德国标准，澳大利亚标准
，日本标准GB，HB，GJB，EJ，HG，JB， ANSI，ASTM，AS/NZS，API，ASCE，ASME，BS，DIN，EN，IEEE，IEC，

IPC，ISO，JIS，MIL， NACE，
SAE，UL等等

可为您提供的标准服务项目
一、标准检索和标准资料提供：
　　 根据客户的需求提供标准号或标准名称检索相关标准；如需订购标准可以提供标准资料.
二、标准查新和标准有效性确认：　

根据客户提供的标准号和标准名称对标准进行查新和现行有效性确认，并出具查新报告和有 效性确认报告。
三、标准翻译和标准代购服务：
    我们与世界知名的国外标准化组织，如ISO、IEC、BSI、JSA、DIN、ASTM、AS、IHS ASME 等30多个国家及

国际标准化机构保持着良好的业
务合作与联系，是30多个国家及国际标准化 组织机构在中国的分销机构。我们保证能以优惠的价格为用户提供

{zy}质的服务。国内外标准互译
的服务。