输送带、传送带中英大全阿里巴巴silver320hulan的博客BLOG

本人原创 qq:240190863 手机:1501600365 欢迎咨询和讨论

Belts:

输送带

 Balanced Weave

 平衡编织型(螺旋型金属输送带)

 BW.jpg

Manufactured using left & right hand spiral connected with a crimped connecting rod to create a balanced weave that is straight tracking. Balanced weave is the most common weave used in general friction driven applications, positive driven mesh, and chain driven applications. Often used for architectural mesh and safety curtains. Available any material.

平衡编织型输送带,由左螺旋、右螺旋交替,弯穿条连接编制而成。平衡编织是被采用于一般摩擦驱动、链式驱动应用和强制驱动网中最常见的织。通常用于建筑网和消防幕。可用任何材料。

 

Double Balanced Weave

 双股平衡编织(双股螺旋型金属输送带)

 DBW.jpg A modified variation of balance weave, using two inter-woven spirals. Two 12 pitch spirals are woven together to form a 24 pitch belt. Available in any material. Most commonly used in elevated temperature applications for Sintering, Brazing and Annealing.

是一种采用两个交织螺旋而成的平衡编织改良体。两个12螺距螺旋交织而成的一个24螺距的网带。可用任何材料。最常用于烧结、铜焊(接)和退火高温作业领域。

 

Conventional Weave

 传统编织(菱形输送带)

 CW.jpg Also referred to as chain link mesh since it is woven in the same manner as Chain Link fencing. All spirals are of the same direction and are woven together without the use of connecting rods. Gennerally used in chain driven applications where exceptional drainage of open area are required. Available in any material.

由于以连环栅栏的方式编织,所以也叫做连环网。所有螺旋在同一方向,未经穿条连接编织。广泛用于链式驱动领域,特别为露天场地的下水道所需。可用任何材料。

 

Compound Balanced Weave(Cordweave)

 复合平衡编织/收缩编织(人字形网带)

 CBW.jpg A variation of the balanced weave, consisting of alternating left & right hand sprials compressed to create a very tight weave with a flat surface. Generally assembled with a straight connecting rod, but is available in limited specifications with a crimped connecting rod. Common mesh used for small fasteners, catalyst and baking bands. Also used as furnace curtains. Available in any material.

平衡编织的一种变体。由交替左,右螺压缩成一紧密平面的编织。广泛采用直穿条连接,但在有限规格中可采用弯穿条。普遍被用作小扣件,催化剂和烘烤运输带,也被用作熔炉幕帘。可用任何材料。

 

Flat Wire Belting

 扁丝输送带(长城型金属输送带)

 FWB.jpg

Cost effective open design belting using flat strip to form spirals in a rectangular opening joined with straight pins. Flat Wire belting is available in galvanized, high carbon and stainless steel. A complete line of sprockets, shafts, flights and attachments are available.

用扁条以空心矩形的形状形成螺旋并用直钉固定形成有效的开口设计网带。可采用镀锌钢,高碳钢和不锈钢为材质。与链轮、轴承、阶梯和配件形成完整生产线。

 

 Flat-Flex Belting

 扁平花线带(乙型网带)

ffb.jpg

Light weight & open construction makes this belt popular in baking and food processing. Positive driven belting manufactured from 302 stainless steel and music wire. A complete line of sprockets, blanks, shafts and turn belts are available.

轻质和开口结构使得此带在烘焙和食品加工行业广泛被使用。确动式输送带由302不锈钢和钢琴丝制成,与链轮、插板、轴承和回转皮带形成完整流水线。

Rod Reinforced

穿条增强型(链条型金属输送带)

RR.jpg

A single directional weave with a straight connecting rod to add strength to the weave. Generally used in high temperature furnaces where high strength to weight is required. This weave does not track well due to the single directional weave.

直穿条的连接给单向编织加强了整体的负荷能力,所以被广泛采用在高温熔炉中。由于单向编织,此网带较容易跑偏。

LLB.jpg

Commonly used in the baking industry for cooling, this belt is constructed with straight parallel rods joined together in a ladder fashion. Available in 1/2”, 5/8” and 3/4” pitch in Tinned or Stainless Steel. Available in standard widths of 12, 18, 24, 30 & 36 inches in 10 foot rolls. A complete line of sprockets, attachments and turn belts are available.

由平行的直穿条以阶梯形状组合的阶梯链接式传送带被广泛采用在焙烤食品的冷却。镀锌钢或不锈钢可用1/2”, 5/8” 和3/4”螺距。每卷10英尺长可用12, 18, 24, 30 和 36英寸宽。与链轮、附件和回转皮带形成完整流水线。

FL.jpg

Positive driven belt in 1/2” & 1” pitch variations. Used in straight running and radius applications (inside radius is 2.2 x belt width). Driven via a stamped U shaped link on each edge joined with a 6 gauge rod (.192”). Available with mesh overlay for very fine or flat product. Commonly used on cooling or freezing conveyors and spiral towers in the food processing and baking industries.

1/2” & 1” 螺距的确动式传送带变体,用于直线输送和环线输送(内半径=2.2 x带宽)。以6号穿条(.192”)端的加盖U型环作驱动。可铺上网输送精细和扁平物品。常用于食品加工和焙烤食品工业冷却或急冻输送机和螺旋塔。

Chain Driven Belting

链动式输送带

cdb.jpg

Mesh belting with chain attached to each edge for positive drive. The chain can be attached by rods that pass through the mesh or with channel/bar supports that are bolted/welded to the chain. The construction method used is based on the capacity required and the mesh will be determined by the smallest part size. Most common meshes are balanced weave mesh woven to accommodate the support spacing. Common applications are ovens, quench tanks, washers, fryers, freezers and any application that requires positive drive to eliminate any potential tracking problems。

链条与穿条闩上或者焊接在输送网带两端作为强制驱动。可由指示的生产能力和尺寸最小的零件选择结构和网面,而最常见的网面是采用能适应支撑间距的平衡编织型网。此网带常用于烤炉、淬火槽、洗涤塔、炸炉、冷冻机和其他需要强制驱动而xx跑偏问题的领域。



无显示 无显示
郑重声明:资讯 【输送带、传送带中英大全阿里巴巴silver320hulan的博客BLOG】由 发布,版权归原作者及其所在单位,其原创性以及文中陈述文字和内容未经(企业库qiyeku.com)证实,请读者仅作参考,并请自行核实相关内容。若本文有侵犯到您的版权, 请你提供相关证明及申请并与我们联系(qiyeku # qq.com)或【在线投诉】,我们审核后将会尽快处理。
—— 相关资讯 ——