译文：
1、调试温度时应把出水流量开到{zd0}。 2、调节钮正旋方向是降温、逆旋方向是升温，初次调节请注意从低温方向往高温方向调节，以防xx。 3、调节钮低温方向听尽头是关闭热水，高温方向的尽头是关闭冷水，如果热水温度不高，可以关闭冷水只用热水洗浴，但使用过后应注意高回低温区域，以免下次使用时发生xx。 4、如果冷、热水进水压力不一致，且没有安装单向止流阀，请注意每次使用后，将调温钮调到低温方向尽头，即关闭热水状态，{zd0}程度防止冷热水互串。

“ Thermostatic mixing valve for use and debug Notes ”是由提供的国际阀门新闻，译文仅供参考。另外，中国气动阀门网还提供相关产品搜索：、、、、等。

原文：
1, debug, temperature, water flow should be open to the maximum. 2, controls the direction of positive rotation is cooling, reverse rotation direction is heating up, the initial adjustment note to the heat from low temperature and the direction of regulation, to prevent burns. 3, controls the direction of listening to the end of low temperature hot water is turned off, heat is off the direction of the end of the cold water, if water temperature is not high, you can close the cold water bath with hot water only, but returned after use should be noted that high temperature region, so that next time use and personal injury. 4, if cold, hot water pressure is inconsistent, and only one-way flow valve is not installed, please note that after each use, will be transferred to low temperature and thermostat knob end, that is, the state shut down water, hot and cold water to prevent the maximum each string.