性能特征Performance feature
◎适用于直通法兰式阀门的密封压力和阀体强度压力性能试验。
◎压紧方法采用法兰端面密封,抱压爪夹紧阀门法兰背面进行工作试验,试验结果没有受外力影响。
◎阀门在试验过程中可翻转90度工作,特别适用气密封性能试验。
◎系统内配置高,低压注水泵供压装置,试验介质循环贮存使用。
◎试压介质为水、气、煤油,由用户任意选择。
◎设有试压安全保护装置。
◎可选配智能检测数据管理系统,气压增压装置。
◎Is suitable for through flange valve sealing pressure and valve body intensity pressure performance test.
◎The impact method adopts the flange end face seal, holds and presses the claw clip valve flange reverse side to carry out the working experiment and the test result has no the influence of outside force.
◎Valve can turn 90 degree working in testing course, especial suitable for property experiments of gas seal.
◎Equip with the high and low pressure water pump pressure supply device in system, the test medium circulating storage use.
◎Pressure trial medium is water, air and kerosene, arbitrary option by users.
◎Equip with the pressure test safe protective device.
◎You can select the intelligent detection data control system,air pressure boosting device.
1 水压表 Hydraulic meter |
6 水泵低压表 Water pump low pressure meter |
11 右泄压开关 Right decompression switch |
16 按钮操纵板 Button operating pane |
2 水总开关 Main switch |
7 左向进水开关 Left water inlet switch |
12 左轴向增压表 Left axial boosting meter |
17 低压水泵 Low pressure water pump |
3 气总开关 Gas main switch |
8 油泵压力表 Oil pump pressure meter |
13 气压表开关 Air pressure switch |
18 高压水泵 High pressure water pump |
4 左泄压开关 left decompression switch |
9 右向进水开关 Right water inlet switch |
14 右轴向增压表 Right axial boosting meterl |
19 移动架 Removal frame |
5 气压表 Pneumatic table |
10 电接点压力表 Electric point joint pressure table |
15 压力对照表 Pressure contrast table |
20 压爪 Press claw |
YFC型外形结构YFC overall structure |