高压注浆堵漏工法及特性_天津市华强防水堵漏工程公司_百度空间
高压注浆堵漏-工法特性
  是利用高压灌注机所产生的巨大压力,将药剂送至壁体裂缝的中间部位,使药剂以裂缝中间部位为中心向四周扩散。药剂与水快速反应硬化后,将裂缝{yj}性堵住,确实达到堵漏的效果。
  本工法所使用之高压注浆机,灌注压力高、流量大,可快速止水,确为有效的堵水工法。尤其是对大量涌水的漏水点,本工法更有神奇之处。
  本工法之灌注点是由结构裂缝的中心位置开始灌注,其确实性高。尤其是对厚度大于40cm以上的混凝土壁体,使用本工法堵漏更是快速且有效。

材料

机具

高压灌注机,灌注压力可达8000-10000磅,可进入0.02mm以上的发丝裂缝。    

可切换进料方式:
  除一般传统置料方式外,本机另可切换至吸料管进料,可节省倒料时间及节省材料。唯加装此装置时,在使用完毕之后,务必马上使用清洁剂,清洗置料系统及吸料管,避免药剂凝固于其中导致阻塞。

产品保固及维修:
  产品采用摸组化设计,便于组装、拆卸及保养,且提供维修服务,供应充足的另配件。

Perfusion machine using high-pressure generated by the tremendous pressure to the Pharmacy to the wall cracks in the middle of body parts, so that cracks in the middle of Pharmacy as the center to the surrounding parts of the proliferation. Pharmacy hardening rapid reaction with water will be permanently blocked cracks certainly achieved the effect of plugging.
The method used high-pressure grouting machine, high perfusion pressure, flow, water can quickly do the blocking for the effective hydraulic method. Especially for a large number of gushing water leakage points, this method is more magic.
The perfusion method is the structural cracks from the center of the beginning of reperfusion, and its really high. Especially for the thickness of more than 40cm above the concrete wall body, the use of the plugging method is rapid and effective.


郑重声明:资讯 【高压注浆堵漏工法及特性_天津市华强防水堵漏工程公司_百度空间】由 发布,版权归原作者及其所在单位,其原创性以及文中陈述文字和内容未经(企业库qiyeku.com)证实,请读者仅作参考,并请自行核实相关内容。若本文有侵犯到您的版权, 请你提供相关证明及申请并与我们联系(qiyeku # qq.com)或【在线投诉】,我们审核后将会尽快处理。
—— 相关资讯 ——