译文:
在电磁阀的使用过程中,有几点是大多数学徒都不太注意的。下两谈谈这些注意事项。
安装注意事项。当电磁阀应用在气动系统中,与气动元件连接时一般采用生料带(即密封带)缠绕。同样是为了完成密封的功能而缠绕。但是各位有经验的朋友肯定会碰到这样一种现象:明明是全新的元件,怎么试机时却老是漏气。这其中的一个大原因,也是最常见的原因就是,在生料带缠绕时没有按正确的方法,有部分生料带跑到气路里面去了。这要求在缠绕生料带时要注意一个正反的顺序。这点请各位学徒自已去试验和体验。
对于电流大的电磁阀须在前端加装继电器。尤其是油压系统中的电磁阀,因为电流大,如果不加装继电器,则该电磁阀之寿命将很短。
“ 大电流的电磁阀安装和使用事项”是由提供的国际阀门新闻,译文仅供参考。另外,中国电磁阀网还提供相关产品搜索:、、、、等。
原文:
In the process of using electromagnetic valve, there are a few
points that most apprentices are not very attention. The next two
to talk about these precautions. Installation Notes. When the solenoid valves used in pneumatic systems,
and pneumatic components, raw materials commonly used to connect
with (ie, sealing tape) winding. Similarly, in order to complete
the function of sealing wound. However, you will have experience of
a friend will definitely come across such a phenomenon: the obvious
is a new component, how Shique always leak test machine. This is
one of the major causes is the most common reason is that, in the
raw material with a wound without the correct way, some raw
materials with a gas line ran to go inside. This requires raw
materials with time winding should pay attention to a positive and
negative order. This urge to experiment and experience their own
apprentices. For the current large solenoid valves to be installed in the front-end relays. In
particular, solenoid valve hydraulic system, because current, if
you do not install relay, then the solenoid valve of the life span
will be very short.
原文来源:
已投稿到: |
|
---|