K我们的“油脂样”锻压化合物具有高度的添加剂，防止该工具，工件接口，温度可超过1000 0三Elastrohydrodynamic润滑（花脸）金属与金属接触形成一个坚固均匀分布的电影，xx磨损，提高表面质量。它的发展氯化石蜡，选择合成脂肪和合成油下，从我们的长链使用极大的压力。
我们专门组建和管，棒，线，棒材和空白图纸化合物。 Hangsterfer的可定制一体，适用于任何独特的锻压应用程序可能有产品。

Aldraw ®  

Aldraw的J - 2（xx）一个沉重的粘度化合物的制定，特别是发达国家，不锈钢管材及其他难以吸引金属。的J - 2也被广泛用于绘图条及杆，以及成型，拉深，射孔，下料，冲压成形及其他业务。
Aldraw的J - 1（xx）中型级化合物的制定，建立和冲压。推荐用于管图纸和拉深，以及在制作金属涂料10-19衡量。
Aldraw的J - 4（xx）一个打火机比J - 1级粘度化合物的J - 4是用于中度冲压，拉伸，在中度和重度应用的形成。的J - 4可抽，但通常是手工应用。
Aldraw的J - 50级一个打火机复合粘度比J - 4，歼50是用于小型冲压，拉伸，并在较严重的应用程序的形成。歼50是很容易穿透金属泵和更迅速。
Aldraw的J - 50电子
Aldraw的J - 2 E本是水的Aldraw的J - 2可清洁的版本。
Aldraw的J - 1 E本是水的Aldraw的J - 1可清洁的版本。
Aldraw的J - 1黑暗这是一个特殊版本的Aldraw的J - 1，我们在海外销售。
Aldraw的J - 2，这是一个黑暗的Aldraw的J - 2，我们的海外销售特殊版本。
Aldraw第纳尔- 8801阿中粘度化合物与管内制定浮动插头配合使用绘图产业。提供了一个明亮的结束时使用的I.D.
Aldraw第纳尔- 9020用于金属成型应用。不含氯化石蜡或高浓度的二氧化硫。水溶液可清洁，无油。
SuperAllTap CF卡用在金属成型应用。不含氯化石蜡或高浓度的二氧化硫。水溶液可清洁，无油。
Aldraw JH - 9402用于管和拉丝表面质量和完成时的ID是至关重要的。它也可以用于拉深成形时，传统的流体和不足。 JH 9402主要用于不锈钢，镍合金和钛，但可以用在xxx的材料。
Aldraw的K - 21这种油是用于中度责任应用，需要石油，可以重新分发，提供适当水平的EP添加剂和清洁的水清洗系统小康容易。
Aldraw的K - 90的为K - 21相同，但更多的重型应用目的，如绘画和形成。
这种流体不消失石油顾名思义。它消失了！这是最常用的轻型冲压成形的有色金属材料的应用。
 

Precoats

112量子点，核因子浓缩
114量子点，核因子浓缩
5 PC的核因子浓缩 

Our “grease-like” metalforming compounds are highly fortified with additives that prevent metal-to-metal contact at the tool-workpiece interface where temperatures can exceed 1000 0 C. Elastrohydrodynamic Lubrication (EHL) forms an evenly distributed film that eliminates galling and improves surface quality. It develops under extreme pressure from our use of long-chain chlorinated paraffins, select synthetic fat and synthetic oils.
We specialize in forming and drawing compounds for tube, rod, wire, bar and blanks. Hangsterfer’s can custom blend products for whatever unique metalforming application you may have.

Aldraw®

Aldraw J-2 (Clear) A heavy viscosity compound developed especially for drawing, stainless steel tubing and other difficult to draw metals. J-2 is also used extensively in drawing bars and rods, as well as for Forming, deep drawing, perforating, blanking, stamping and other forming operations.
Aldraw J-1 (Clear) A medium grade compound for drawing, forming and stamping. It is recommended for tube drawing and deep drawing, as well as a coating in fabricating 10-19 gauge metals.
Aldraw J-4 (Clear) A lighter grade viscosity compound than J-1, J-4 is utilized for moderate stamping, drawing, and forming in moderately severe applications. J-4 can be pumped, but is usually hand applied.
Aldraw J-50 A lighter grade viscosity compound than J-4, J-50 is utilized for light stamping, drawing, and forming in less severe applications. J-50 is easily pumped and penetrates metal more rapidly.
Aldraw J-50 E
Aldraw J-2 E This is the aqueous cleanable version of Aldraw J-2.
Aldraw J-1 E This is the aqueous cleanable version of Aldraw J-1.
Aldraw J-1 Dark This is a special version of the Aldraw J-1 that we sell overseas.
Aldraw J-2 Dark This is a special version of the Aldraw J-2 that we sell overseas.
Aldraw JD-8801 A medium viscosity compound formulated for use in conjunction with floating plugs in the tube drawing industry. Provides a bright finish when used on the I.D.
Aldraw JD-9020 Used in metal forming applications. Does not contain chlorinated paraffins or high concentrations of sulfur. Aqueous Cleanable, Oil Free.
SuperAllTap CF Used in metal forming applications. Does not contain chlorinated paraffins or high concentrations of sulfur. Aqueous Cleanable, Oil Free.
Aldraw JH-9402 Used for tube and wire drawing when surface quality and finish of the ID are critical. It can also be used for deep drawing and forming when conventional fluids are inadequate. JH 9402 is primarily for stainless steels, nickel alloys and titanium, but can be used safely on most materials.
Aldraw K-21 This oil is intended for moderate duty applications that require an oil that can recirculate, provide an adequate level of EP additive and clean off easily in aqueous cleaning systems.
Aldraw K-90 The same as K-21, but intended for more heavy duty applications, like drawing and forming.
Vanishing Oil This fluid does as the name suggests. It vanishes! It is used most frequently for light stamping and forming applications on Non-Ferrous materials.
 

Precoats

112 QD-NF Concentrate
114 QD-NF Concentrate
5 PC-NF Concentrate