ASTM标准A3
| A467/A467M-01 | 机器链和盘旋链 | Standard Specification for Machine and Coil Chain |
| A469-04 | 用于发电机转子的真空处理钢锻件 | Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors |
| A470-03 | 涡轮机转子和轴用经真空处理的碳素钢和合金锻件 | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts |
| A471-02 | 涡轮转子转盘和转轮用真空处理合金钢锻件技术规范 | Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels |
| A472-98(2003) | 蒸汽涡轮机轴及转子锻件的热稳定性的试验方法 | Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings |
| A473-01 | 不锈和耐热钢锻件 | Standard Specification for Stainless Steel Forgings |
| A474-03 | 包铝钢丝绳标准 | Standard Specification for Aluminum-Coated Steel Wire Strand |
| A475-03 | 镀锌钢丝绳 | Standard Specification for Zinc-Coated Steel Wire Strand |
| A476/A476M-00 | 造纸厂干燥辊用球墨可锻铸铁件 | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls |
| A478-97(2002) | 铬镍不锈钢和耐热钢制编织钢丝 | Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
| A479/A479M-04 | 锅炉及压力容器用不锈钢和耐热钢棒与型材 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| A480/A480M-04 | 扁平轧制耐热不锈钢厚板材、薄板材和带材通用要求 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A481-94(2000) | 金属铬 | Standard Specification for Chromium Metal |
| A482-93(2000) | 铬铁硅 | Standard Specification for Ferrochrome-Silicon |
| A483-64(2000) | 硅锰合金 | Standard Specification for Silicomanganese |
| A484/A484M-03a | 不锈及耐热锻钢棒,钢坯及锻件的规格 | Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings |
| A485-03 | 高淬透性耐磨轴承钢的技术规范 | Standard Specification for High Hardenability Antifriction Bearing Steel |
| A487/A487M-93(1998) | 受压钢铸件 | Standard Specification for Steel Castings Suitable for Pressure Service |
| A488/A488M-01e1 | 钢铸件焊接规程和工作人员的合格鉴定 | Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel |
| A489-04 | 碳素钢吊耳 | Standard Specification for Carbon Steel Lifting Eyes |
| A490M-04a | 最小拉伸强度为150千磅/平方英寸热处理钢结构螺栓 | Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength |
| A490-04a | 最小拉伸强度为150千磅/平方英寸热处理钢结构螺栓 | Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] |
| A491-03 | 镀铝钢链环栏栅结构 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| A492-95(2000) | 耐热不锈钢丝绳 | Standard Specification for Stainless Steel Rope Wire |
| A493-95(2000) | 冷镦和冷锻不锈钢和耐热钢丝 | Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
| A494/A494M-03ae1 | 镍和镍合金铸件 | Standard Specification for Castings, Nickel and Nickel Alloy |
| A495-94(2000) | 硅钙合金钢技术规范 | Standard Specification for Calcium-Silicon Alloys |
| A496-02 | 钢筋混凝土用变形钢丝 | Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement |
| A497/A497M-02 | 钢筋混凝土用焊接变形钢丝网 | Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete |
| A498-04 | 无缝与焊接碳素钢,铁素体钢与奥氏体钢制有整体散热片的换热器钢管 | Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins |
| A499-89(2002) | 轧制丁字钢轨用的碳素钢棒材及型材的技术规范 | Standard Specification for Steel Bars and Shapes, Carbon Rolled from T Rails |
| A500-03a | 圆形与异型焊接与无缝碳素钢结构管 | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| A501-01 | 热成型焊接与无缝碳素钢结构管 | Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing |
| A502-03 | 结构钢铆钉规范 | Standard Specification for Rivets, Steel, Structural |
| A503/A503M-01(2001)e1 | 锻制大型曲轴的超声波检验 | Standard Specification for Ultrasonic Examination of Forged Crankshafts |
| A504-04e1 | 锻制碳素钢轮 | Standard Specification for Wrought Carbon Steel Wheels |
| A505-00 | 热轧和冷轧合金钢薄板和带材 | Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| A506-04 | 正规质量及优质结构的热轧和冷轧合金钢薄板与带材 | Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
| A507-04 | 优质拉拔,热轧和冷轧合金钢薄板与带材 | Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
| A508/A508M-04b | 压力容器用经回火和淬火真空处理的碳素钢与合金钢锻件 | Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels |
| A510-03 | 碳素钢盘条和粗圆钢丝通用要求 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel |
| A510M-03 | 碳素钢盘条和粗圆钢丝通用要求 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric] |
| A511-04 | 无缝不锈钢机械管 | Standard Specification for Seamless Stainless Steel Mechanical Tubing |
| A512-96(2001) | 冷拉对缝焊碳素钢机械管 | Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing |
| A513-00 | 电阻焊碳素钢与合金钢机械钢管 | Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing |
| A514/A514M-00a | 焊接用经回火与淬火的高屈服强度合金钢板 | Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding |
| A515/A515M-03 | 中温及高温压力容器用碳素钢板 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
| A516/A516M-04 | 中温及低温压力容器用碳素钢板 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| A517/A517M-93(1999) | 压力容器用经回火与淬火的高强度合金钢板 | Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered |
| A518/A518M-99(2003) | 耐蚀高硅铁铸件 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| A519-03 | 无缝碳素钢与合金钢机械管 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| A521-03 | 一般工业用闭式模钢锻件 | Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use |
| A522/A522M-01 | 低温用锻制或轧制含镍8%和9%的合金钢法兰,配件,阀门和零件规格 | Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service |
| A523-96(2001) | 高压管型电缆线路用平端无缝与电阻焊钢管 | Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
| A524-96(2001) | 常温和低温用无缝碳素钢管 | Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures |
| A529/A529M-04 | 高强度碳锰结构钢质量 | Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality |
| A530/A530M-04 | 特种碳素钢和合金钢管 | Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe |
| A531/A531M-91(2001) | 涡轮发电机钢定位环的超声波检验 | Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings |
| A532/A532M-93a(2003) | 耐磨铸铁 | Standard Specification for Abrasion-Resistant Cast Irons |
| A533/A533M-93(1999) | 压力容器用经回火和淬火的锰钼及锰钼镍合金钢板 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
| A534-04 | 用于耐摩擦轴承的渗碳钢 | Standard Specification for Carburizing Steels for Anti-Friction Bearings |
| A536-84(1999)e1 | 球墨铸铁件 | Standard Specification for Ductile Iron Castings |
| A537/A537M-95(2000) | 压力容器用经热处理的碳锰硅钢板 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
| A540/A540M-04 | 特殊用途的合金钢螺栓材料 | Standard Specification for Alloy-Steel Bolting Materials for Special Applications |
| A541/A541M-04 | 压力容器部件用经淬火和回火的碳素钢及合金钢锻件 | Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components |
| A542/A542M-99e1 | 压力容器用经回火和淬火的铬钼、铬钼钒及铬钼钒钛硼合金钢板 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium |
| A543/A543M-93(1999) | 压力容器用经回火和淬火的镍铬钼合金钢板 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum |
| A550-78(2000) | 铌铁合金 | Standard Specification for Ferrocolumbium |
| A551-94(1999) | 钢轮箍 | Standard Specification for Steel Tires |
| A553/A553M-95(2000) | 压力容器用经回火和淬火的含8%及9%镍的合金钢板 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel |
| A554-03 | 焊接的无缝钢机械管 | Standard Specification for Welded Stainless Steel Mechanical Tubing |
| A555/A555M-97(2002) | 耐热不锈钢丝和盘条的通用要求 | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
| A556/A556M-96(2001) | 无缝冷拉碳素钢给水加热器管 | Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes |
| A560/A560M-93(1998) | 铬镍合金铸件 | Standard Specification for Castings, Chromium-Nickel Alloy |
| A561-71(1999) | 工具钢棒的宏观刻蚀试验 | Standard Recommended Practice for Macrotech Testing of Tool Steel Bars |
| A562/A562M-90(2001) | 搪玻璃或扩散金属镀层的压力容器用锰钛合金碳素钢板 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings |
| A563-04a | 碳合金钢螺母 | Standard Specification for Carbon and Alloy Steel Nuts |
| A563M-04 | 碳素钢及合金钢螺母技术规范（米制） | Standard Specification for Carbon and Alloy Steel Nuts [Metric] |
| A564/A564M-04 | 热轧及冷精轧时效硬化处理过的不锈钢棒材和型材技术规范 | Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
| A565-03b | 高温用马氏体不锈钢棒,锻件和锻制坯规格 | Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service |
| A568/A568M-03 | 热轧及冷轧高强度低合金碳素钢薄板 | Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| A571/A571M-01 | 适用于低温压力容器零件的奥氏体球墨铸铁件 | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service |
| A572/A572M-04 | 高强度低合金钴钒结构钢技术规范 | Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel |
| A573/A573M-00a | 增强韧性的结构碳素钢板 | Standard Specification for Structural Carbon Steel Plates of Improved Toughness |
| A574-04 | 合金钢内六角螺钉 | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| A574M-04 | 合金钢内六角螺钉(米制) | Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric] |
| A575-96(2002) | 商品级碳素钢棒(M级) | Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades |
| A576-90b(2000) | 特级热轧碳素钢棒 | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality |
| A577/A577M-90(2001) | 钢板的超声角波束检验 | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
| A578/A578M-96(2001) | 特殊设备用的普通钢板和包覆钢板的直波束超声探伤检验 | Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications |
| A579-04 | 超高强度合金钢锻件 | Standard Specification for Superstrength Alloy Steel Forgings |
| A580/A580M-98 | 耐热不锈钢丝 | Standard Specification for Stainless Steel Wire |
| A581/A581M-95b(2000) | 高速切削用耐热不锈钢丝和盘条 | Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods |
| A582/A582M-95b(2000)e1 | 热轧或冷精轧的高速切削不锈及耐热钢棒 | Standard Specification for Free-Machining Stainless Steel Bars |
| A586-98 | 镀锌平行和螺旋形钢丝绳 | Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-Coated Wire for Spun-In-Place Structural Strand |
| A587-96(2001) | 化学工业用电阻焊低碳钢管 | Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry |
| A588/A588M-04 | 高强度低合金结构钢4英寸(100mm)厚屈服点最小为50ksi(345MPa) | Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick |
| A589-96(2001) | 水井用无缝和焊接碳素钢管 | Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe |
| A591/A591M-98 | 薄镀层电解镀锌薄钢板 | Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications |
| A592/A592M-04 | 压力容器用经回火和淬火的高强度低合金钢锻制附件和零件 | Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels |
郑重声明：资讯 【ASTM标准A3】由 发布，版权归原作者及其所在单位，其原创性以及文中陈述文字和内容未经(企业库qiyeku.com)证实，请读者仅作参考，并请自行核实相关内容。若本文有侵犯到您的版权， 请你提供相关证明及申请并与我们联系（qiyeku # qq.com）或【在线投诉】，我们审核后将会尽快处理。
—— 相关资讯 ——
