慧聪网塑料讯：中国是世界五大合成树脂的主要消费国，但多年来国内生产已无法满足消费者的需求，对外依存度较高。据统计，在中国五大合成树脂近几年，需要维持在2005年的需求快速增长的三三三五〇 〇 〇 〇吨共近5年超过10％的平均增长率为11.3％，与此同时， ，达到2005年中国五大合成树脂进口一一三五零零零零吨。由国内供应短缺影响，预计未来几年中国五大合成树脂产量将稳定增长的需求。
2000多年，是世界上体育，平均百分之四点四，2005年总产出的年增长率聚丙烯，聚苯乙烯，聚氯乙烯，ABS等这五个合成树脂产量达到一万五千五百零四点○○○万吨。从品种看，在增长最快，生产PP，平均为5.0以上的年增长速度在2005年四千零一十万吨年产;以年均5.3％的年增长率，2005年率惠益分享产量达到五八六〇 〇 〇 〇吨;聚乙烯产量平均每年增长4.1％，2005年的增长率达到六千一百零九点零零零万吨。

到2005年，世界五大合成树脂一亿八千零一十九万吨能力。一，体育是七三二八○○○○吨，占了40.7％，聚丙烯是四千二百八十三点〇万吨，占23.8％，聚氯乙烯为三千六百十一点〇万吨，占20％左右。 2005年，世界五大合成树脂消费量为一万五千三百三十八点零零零万吨。一，体育是六○二四○○○○吨，PP的三九八八〇 〇 〇 〇吨，分别为26.0和百分之39.3，总。消费增长从1990年以来的情况，整体平均4.4％的年增长率。其中，是增长最快的聚丙烯，年平均增长率为5.7％，为5.1％惠益分享;体育为4.2％;常任3.3％;聚氯乙烯3.3％。

未来5年世界五大合成树脂的生产能力，到2010年的5.4％和4.8％的需求增长率将达到二亿三千四百〇五万吨，一万九千三百六十五点〇 〇万吨。其中，生产能力增长最快的是聚丙烯，聚乙烯和ABS，是增长最快的聚丙烯，ABS和聚乙烯的需求。

自1995年以来，中国五大合成树脂在2005年保持快速增长的能力为二千四百二十七万吨，产量二〇三七〇 〇 〇 〇吨，表观消费量三千三百三十五万吨。其中，聚氯乙烯生产能力为九百十二点○○万吨最，约占38％;体育的五五二○○○○吨能力;聚丙烯五百四十四点零万吨能力。 2005年，在中国五大合成树脂生产保持稳定，其中包括聚乙烯，聚丙烯和PVC的增长，增长速度相对较快：PE，以5034000吨，占了24.7％，聚丙烯五百二十三点零万吨，占25.7％;聚氯乙烯六四九二零零零吨，约占32％以上。

要从国内合成树脂中的前5名，聚乙烯，聚氯乙烯，聚丙烯仍然是前三名，在2005年体育达一零二四零零零零吨，聚氯乙烯880万吨，聚丙烯八百二十三点〇万吨消费。 2010年国内合成树脂消费量将达到预期，在未来5年以年均6.5以上的年增长率为45万吨。一，体育增幅为6.6％，高密度低密度的物料增幅均高于预期的增长;聚丙烯8.9％;聚氯乙烯到5.6％;常任3.4％;惠益分享为4.8％。在需求稳定增长，预计产量将保持稳定增长。 06.9.13

China is the world’s five major consumer of synthetic resin, one of

Huicong net plastic inquiry: China is the world’s five major consumer of synthetic resin, but over the years domestic production has been unable to meet consumer demand, higher external dependence. According to statistics, in recent years of China’s five major synthetic resin needs to maintain a rapid growth in demand in 2005 a total of 33.35 million tons, nearly 5-year average growth rate of more than 10% to 11.3%; At the same time, in 2005 China’s five major synthetic resin imports reached 11.35 million tons. Affected by the shortage of domestic supply is expected over the next few years China’s five major synthetic resin output will be steady growth of demand.
2000 years, the world’s PE, PP, PS, PVC and ABS synthetic resin output of these five at an average annual rate of 4.4 percent growth in total output in 2005 reached 155.04 million tons. From the varieties look, PP production in the fastest growing, with an average annual growth rate of 5.0 percent, in 2005 annual production of 40,100,000 tons; ABS production at an average annual growth rate of 5.3% in 2005 reached 5,860,000 tons; PE production at an average annual growth rate of 4.1% in 2005 reached 61.09 million tons.

By 2005, the world’s top five synthetic resin capacity of 180,190,000 tons. One, PE was 73.28 million tons, accounting for 40.7%; PP was 42.83 million tons, accounting for 23.8%; PVC for 36.11 million tons, accounting for about 20%. In 2005 the world’s top five synthetic resin consumption was 153.38 million tons. One, PE was 60.24 million tons, PP was 39.88 million tons, respectively, the total of 26.0 percent and 39.3 percent. Consumption growth from the situation, since 1990 the overall average annual growth rate of 4.4%. Among them, are the fastest-growing PP, the average annual growth rate to 5.7%; ABS for 5.1%; PE was 4.2%; PS for 3.3%; PVC 3.3%.

the next 5 years the world’s top five synthetic resin production capacity and demand growth rates of 5.4% and 4.8% by the year 2010 will reach 234.05 million tons, 193.65 million tons. Among them, the fastest growing production capacity are PP, PE and ABS, are the fastest-growing demand for PP, ABS and PE.

Since 1995, China’s five major synthetic resin maintain rapid growth in capacity in 2005 amounted to 24,270,000 tons, output was 20,370,000 tons, apparent consumption was 33.35 million tons. Of which, PVC production capacity the most, for 9.12 million tons, accounting for about 38%; PE capacity of 5,520,000 tons; PP capacity of 5,440,000 tons. In 2005 the top five synthetic resin production in China to maintain steady growth, including PE, PP and PVC relatively fast growth rate: PE to 5.034 million tons, accounting for 24.7%; PP for 5.23 million tons, accounting for 25.7%; PVC for 6,492,000 tons , accounting for about 32%.

look from the consumption of domestic synthetic resin in the top five, PE, PVC, PP is still the top three, in 2005 PE reached 10.24 million tons, PVC to 8.8 million tons, PP for 8.23 million tons. Expected in 2010 domestic consumption of synthetic resin will reach 45 million tons over the next 5 years at an average annual growth rate of 6.5 percent. One, PE representing an increase of 6.6%, high-density low-density material is higher than expected growth; PP for 8.9%; PVC to 5.6%; PS for 3.4%; ABS at 4.8%. Steady growth in demand, it is expected that production will maintain steady growth. (06-9-13)