单头薄板定厚砂光机
-本机砂光轮采用直径305mm×25mm厚无缝钢管加工而成。
-并表面开槽，可以有效散热。
-配37Kw×4P马达，可以有效切削0.1mm-0.3mm。
-底盘采用真空吸风，皮带表面钻孔，可以有效砂光到1.2mm-21mm之产品。
-其机型可以根据客户需要而设计：有两头和单头两种，还可以是砂底或砂面、上下同时砂几种。
-Sanding wheel of this machine is made from processed seamless steel tubes, 305mm(in diameter)х25mm (in thickness).
-With grooves on its surface, functioning as an effective radiator.
-Motor 37kwх4P makes it good for shearing between 0.1mm-0.3mm.
-Vacuum absorbing base disc, belts with holes on the surface can effectively sand 1.2mm-21mm products.
-Single-head or double-head, bottom-sanding or surface-sanding, or upper-side sanding together with lower-side sanding, all designed with clients` needs.
