原文：Singapore and Malaysia, "three-way valve hydraulic pipe joints Turning Mold" won the national patent
Recently, the company's shares from Star Technology Department was informed that Malaysia, Singapore, Malaysia car, "three-way valve hydraulic pipe joints turning dies" by the national utility model patent. The patent is from the World Wide Web, the Tang Li and Cao Kebang three co-invented. This reporter learned that three-way valve in the hydraulic pipe joints vehicle processing, due to irregular three-way valve connector, in a lathe difficult fixture location, location adjustment time is too long, turning very convenient, but also easy to clip wound surface has been processed, the processing efficiency is not high, and lower yield. In response, World Wide Web, the Tang Li and Cao Kebang three invented the "three-way valve hydraulic pipe joints turning dies." The technology is fixtures, its features are: the main motif of the mold is a cylindrical clip left the Department handle, easy to lathe chuck clamping, while the right side of the internal cavity of rectangular links set up a motif, the motif along the centerline of the rectangle in half Poucheng before and after the two parts, of which the latter part of the mold base, the first part of the mold cover, covered in mold base and mold set up by the corresponding recess and with the vertical center connected straight trough the right center of the groove after the recess and before, after, after the recess cavity formed by combination with the hydraulic piping to be processed form the same three-way valve connector, in addition, in the mold base and mold cover corresponding to open the upper and lower connecting screw and the connecting through-hole, the mold seat cover stamped in the mold after the installation bolt through as close.
原文来自： http://www.google.com.hk/news

原文：Singapore and Malaysia, "three-way valve hydraulic pipe joints Turning Mold" won the national patent

是由提供的阀门新闻，中文译文仅供参考(上海埃非凯阀门有限公司还生产 及电动调速蝶阀，气动通风蝶阀，美标波纹管闸阀，c，平行式双闸板闸阀，欢迎您的选购。)

星马“液压管路三通阀接头车削加工用模具”获国家专利
　 　　日前，记者从星马股份公司技术部获悉，星马汽车“液压管路三通阀接头车削加工用模具”获国家实用新型专利。该项专利是由万维中、唐莉和曹克邦三人共同发明的。 记者了解到，在液压管路三通阀接头的车加工过程中，由于三通阀接头形状不规则，在车床上难于装夹定位，定位调整时间过长，车削加工很不方便，还容易夹伤已加工的工件表面，所以加工效率不高，成品率也较低。针对这种情况，万维中、唐莉和曹克邦三人发明了这项“液压管路三通阀接头车削加工用模具”。该项技术属工夹具，其特征是：该模具的主模体的左部是圆柱体夹柄，便于车床的卡盘装夹，而右部是内部开设有三通凹槽的矩形模体，该矩形模体沿中心线对半剖成前、后两部分，其中后半部为模座，前半部为模盖，在模座和模盖上分别对应开设均由竖向中心通槽和与之相通的右中心直槽组成的后凹槽和前凹槽，此前、后凹槽组合后所形成的空腔与待加工的液压管路三通阀接头的外形相同，此外，在模座和模盖上分别对应开设上、下连接螺孔和连接通孔，将模盖加盖在模座上后，穿装螺栓连成一体。