6 elements required for LED street lights
LED display screen and LED electronic display screen are more and more appearing in people's vision. LED lighting has also been tried on some main roads. So what conditions do LED street lights need to have?
(1) energy saving has the characteristics of low voltage current, small brightness and high brightness. LED lamps used as LED street lamps must have the characteristics of low voltage, low current and high brightness, so as to ensure normal use during installation and high efficiency and energy saving.
(2) new green environmental protection light source, LED USES cold light source, small glare, no radiation, no harmful substances in use. LED has better environmental protection benefits. There is no ultraviolet and infrared ray in the spectrum, and the waste can be recycled. There is no mercury element and no pollution and it can be safely touched.
(3) long life. LED street lamps need to be continuously used, and it is troublesome to replace them in batches. Therefore, long service life is also an important factor in the selection.
(4) reasonable structure of lamps and lanterns. LED lamps will completely change the structure of lamps. According to different usage requirements, the structure of LED lamps will be enhanced again through rare earth under the condition of increasing the initial brightness, and its luminance will be further enhanced after the improvement of optical lens. LED is a solid-state light source encapsulated in epoxy resin. It is an all-solid structure without vulnerable components such as glass bubble filament, so it can withstand shock without being damaged.
(5) simple light color, light color. LED street lamps used as street lamps must have simple light color, which does not need too much noise. It is necessary to ensure the brightness of lighting and the safety of road driving.
(1) energy saving has the characteristics of low voltage current, small brightness and high brightness. LED lamps used as LED street lamps must have the characteristics of low voltage, low current and high brightness, so as to ensure normal use during installation and high efficiency and energy saving.
(2) new green environmental protection light source, LED USES cold light source, small glare, no radiation, no harmful substances in use. LED has better environmental protection benefits. There is no ultraviolet and infrared ray in the spectrum, and the waste can be recycled. There is no mercury element and no pollution and it can be safely touched.
(3) long life. LED street lamps need to be continuously used, and it is troublesome to replace them in batches. Therefore, long service life is also an important factor in the selection.
(4) reasonable structure of lamps and lanterns. LED lamps will completely change the structure of lamps. According to different usage requirements, the structure of LED lamps will be enhanced again through rare earth under the condition of increasing the initial brightness, and its luminance will be further enhanced after the improvement of optical lens. LED is a solid-state light source encapsulated in epoxy resin. It is an all-solid structure without vulnerable components such as glass bubble filament, so it can withstand shock without being damaged.
(5) simple light color, light color. LED street lamps used as street lamps must have simple light color, which does not need too much noise. It is necessary to ensure the brightness of lighting and the safety of road driving.
郑重声明：资讯 【6 elements required for LED street lights】由 Zhongshan Shoubin Lighting Technology Co., Ltd. 发布，版权归原作者及其所在单位，其原创性以及文中陈述文字和内容未经(企业库qiyeku.com)证实，请读者仅作参考，并请自行核实相关内容。若本文有侵犯到您的版权， 请你提供相关证明及申请并与我们联系（qiyeku # qq.com）或【在线投诉】，我们审核后将会尽快处理。
—— 相关资讯 ——
![都匀[中国新闻网]欧式清雅背景墙](https://pic17_2.qiyeku.com/qiyeku_pic/2017/6/28/mnkzs/news/news_pic/image/2017_08_30/20170830100205033.jpg)
