问：
开关，插座是一个小组，有3行（一零线，两个FireWire），如何安装？关键是两个火线接触，灯不亮

答：
电源的火线连接到关于从交换机的话，其他一出火线开关，即使在光线火线连接器，光将是光明的。在电力供应前火线连接到插座连接器分离，从开关火线，零线零线连接到插座连接器，插座，也是可行的。

附件：

答：
灯，然后一个火线零线是不够的。开关控制火线。
两个FireWire接触显示了相同的单相，否则麻烦更大。

How to install light switches and sockets?

Question:
switches and sockets is a panel, there are three lines (a zero-line, two FireWire), how to install? The key is two FireWire contact, light does not shine

Answer:
the power supply to the firing line connected to the switch on the firing line from the switch then the other one out, even in light of the FireWire connector, the light will be bright . The power supply to the firing line from the switch before the separation of the firing line connected to the socket connector, the zero-line zero line connected to the socket connector, the socket is also workable.

Annex:

Answer:
lights, then a FireWire a zero line is enough. switch control firing line.
two FireWire to reach out shows the same single-phase, otherwise, trouble larger.05-11-06