精细雾化喷嘴_喷嘴_上海斐卓Feizhuo(图)

空气雾化喷嘴压力传送式喷雾装置（外混式）

雾化喷嘴有点和特性：

通过外部混合装置，无需改变液体流量，只需改变空气压力，即可对雾化进行控制。

对于扇形喷雾，尺寸A，B,和C是距离喷嘴相应距离处的喷雾角度；

Through the external mixing device, without changing the liquid flow, only need to change the air pressure, can to control the atomization.

For the fan-shaped spray, size A, B, and C corresponding distance is the distance the nozzle spray Angle;

The spray from the nozzle to the maximum dispersion point projection a total distance of D;

When using pressure conveying liquid system, liquid by pressure was taken to the nozzle;

Liquid and compressed air or other gas is mixed in the outside, to produce fully atomized spray;

空气雾化喷嘴通过外部混合装置改变气体压力而不改变液体流率来控制雾化，对于扇形喷雾，尺寸”A“流型宽度,如图所示。喷嘴从喷嘴投射到很大弥散点的总距离为“D”。

雾化喷嘴可以随时的调整气压和水压，比例可随时调整，1：15.

喷雾角度为扇形和实心。角度60°。

接口螺纹大小为3/4.

Air atomizing nozzle changing gas pressure by external mixing device without changing the liquid flow rate to control the atomization, the fan-shaped spray, dimension 'A' type flow width, as shown.Nozzle of projects from the nozzle to the maximum dispersion point total distance for the 'D'.

Atomizing nozzle can adjust the air pressure and water pressure, ratio can be adjusted at any time, 1:15.

The spray Angle for the fan and solid.Angle 60 °.

Interface thread size for three quarters.

工业雾化喷头应用非常广泛，针对不同类型的工况生产研发出各种不同型号的工业雾化喷头，按照参与物体来分，工业雾化喷头分为：工业单流体精细雾化喷头和工业双流体气水雾化空气雾化喷头。不同点在于，单流体精细雾化喷头是通过高压来进行雾化的，双流体空气雾化喷头是通过空气和液体进行混合雾化的。按照材质的不同分为金属工业雾化喷头、不锈钢工业雾化喷头、黄铜工业雾化喷头、塑胶工业雾化喷头以及陶瓷工业雾化喷头等;按照喷雾形状可分为扇形工业雾化喷头、广角扇形工业雾化喷头和圆形工业雾化喷头。