免处理PE料移印油墨

    ¥:165.00

    上海凯贤印刷科技有限公司

    进入店铺
    商品目录
    图文详情

    免处理PE料移印墨销售厂家!

    1、适用范围:主要用于各种PP料、PE、PET、PPB等制品的丝印移印。
    2、产品特性:亮光、遮盖力高、附着力佳、耐冲压、耐天那水、耐丁酮、耐汽油。
    3、稀释剂:用我司专用稀释剂或783开油,用718洗网水清洗网版。 


    4、固化剂:不需添加。 


    5、油墨调配方法:开罐先搅拌均匀,取所需量油墨稀释到合适印刷粘度使用。 


    6、干燥时间:逢然干燥:室温表干5-10分钟,实干24小时;烘烤干燥,80-100度烤20-30分钟,油墨层方可达{zj0}性能。 


    【性能检测】 


    1、3M胶带划百格测试:{bfb}无脱落 


    2、耐冲压测试:1mm厚铝板180°折弯无变化。 


    3、耐丁酮测试:用脱脂棉沾丁酮以500G力水平来回100次无脱色。 


    4、耐天那水测试:用脱脂棉沾天那水以500G力水平来回100次无脱色。 


    【注意事项】 


    1、先小量试印确认符合要求后再批量生产。 


    2、做好承印物的表面xx油脂及杂质工作,以促进附着效果。 


    3、附着力、硬度、耐酸性、耐酒精性、耐化学品性、抗划伤性、耐磨性等性能的检测,需要xx固化后方可检测。 


    4、未经允许情况下,不得将本系列油墨与其它类型油墨混用及配色。 


    5、油墨,稀释剂使用及储存时严禁烟火。 


    6、使用时注意施工场所的通风状况良好,尽量避免皮肤直接接触。 


    7、本品不慎溅入口、鼻、眼、耳内,应用大量水清洗或直接求助医生。 




     Ink characteristics: have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, alcohol resistant and wear resistance, high stability.
    Printing: silk screen printing can be.
    Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.
    Dilution and cleaning: SV3 slow dry open water, UVK1(printing open water) also can use 718 washing network water cleaning.
    Test method (completely dry):
    1, 3M adhesive tape sticky ink surface adhesion in painting,45 degree angle quickly pulled off the oil;
    2, purity 99% of industrial alcohol, using cotton bag in the surface of the ink one kilogram weight to horizontal force and pull 200 times without decolorization;
    3, wear: the eraser 500g force level wipe 500 times back and forth.
    Method of use:
    1, before the use should be fully mixing, use at any time after the closure;
    2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;
    3, mesh plug mesh can be used when washing network water cleaning;
    4, shall not be mixed with other types of ink.
    The matters needing attention:
    1, the plastic material of similar appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;
    2, in the printing process, such as drawing or spread out,may be appropriate to add some slow dry paste can be;
    3, the ambient temperature is too high, it will affect the quality of the original ink;
    4, according to the climate change, please stay away from fire, stored in dark environment.
       


    郑重声明:产品 【免处理PE料移印油墨】由 上海凯贤印刷科技有限公司 发布,版权归原作者及其所在单位,其原创性以及文中陈述文字和内容未经(企业库qiyeku.com)证实,请读者仅作参考,并请自行核实相关内容。若本文有侵犯到您的版权, 请你提供相关证明及申请并与我们联系(qiyeku # qq.com)或【在线投诉】,我们审核后将会尽快处理。
    留言预约
    电话预约
    留言
    *主题
    *手机
    *联系人