HTX200JD海太高精密伺服注塑机
面议
| 规格 | SPECIFICATION | HTX200JD | |||
| A | B | C | |||
| 注射装置 | INJECTION UNIT | ||||
| 螺杆直径 | Screw diameter | mm | 45 | 50 | 55 |
| 螺杆长径比 | Screw L/D ratio | L/D | 23.3 | 21 | 19.1 |
| 理论注射容量 | Shot volume(theoretical) | cm3 | 340 | 420 | 510 |
| 注射重量 | Injiection weight(ps) | g | 310 | 383 | 466 |
| 注射速率 | Injection rate | g/s | 124 | 154 | 186 |
| 注射压力 | Injection pressure | Mpa | 207 | 168 | 139 |
| 螺杆转速 | Screw pressure | rpm | 155 | ||
| 锁模装置 | CLANPING UNIT | ||||
| 锁模力 | Clamping force | kN | 2000 | ||
| 移模行程 | Open stroke | mm | 475 | ||
| 拉杆间距(宽*高) | Space between tie bars(W×H) | mm | 530×530 | ||
| {zd0}模厚 | Max.Mold height | mm | 530 | ||
| 最小模厚 | Min.Mold height | mm | 200 | ||
| 顶出行程 | Ejector stroke | mm | 140 | ||
| 顶出力 | Ejector force | kN | 70 | ||
| 其他 | OTHERS | ||||
| {zd0}油泵压力 | Max.Pump pressure | MPa | 16 | ||
| 电机功率 | Pump motor power | kW | 22.5 | ||
| 电热功率 | Heating power | kW | 13.6 | ||
| 外形尺寸（长*宽*高） | Machine dimension(L×W×H) | m | 5.22×1.57×2.21 | ||
| 油箱容积 | Oiltank cubage | L | 300 | ||
| 机器重量 | Machine weight | t | 7 | ||
