HTL420JD海太高精密伺服注塑机
面议
| 规格 | SPECIFICATION | HTL420JD | |||
| A | B | C | |||
| 注射装置 | INJECTION UNIT | ||||
| 螺杆直径 | Screw diameter | mm | 70 | 75 | 80 |
| 螺杆长径比 | Screw L/D ratio | L/D | 23.6 | 22 | 20.6 |
| 理论注射容量 | Shot volume(theoretical) | cm3 | 1500 | 1723 | 1960 |
| 注射重量 | Injiection weight(ps) | g | 1365 | 1567 | 1784 |
| 注射速率 | Injection rate | g/s | 344 | 395 | 449 |
| 注射压力 | Injection pressure | Mpa | 199 | 173 | 152 |
| 螺杆转速 | Screw pressure | rpm | 160 | ||
| 锁模装置 | CLANPING UNIT | ||||
| 锁模力 | Clamping force | kN | 4200 | ||
| 移模行程 | Open stroke | mm | 740 | ||
| 拉杆间距(宽*高) | Space between tie bars(W×H) | mm | 760×760 | ||
| {zd0}模厚 | Max.Mold height | mm | 780 | ||
| 最小模厚 | Min.Mold height | mm | 250 | ||
| 顶出行程 | Ejector stroke | mm | 200 | ||
| 顶出力 | Ejector force | kN | 110 | ||
| 其他 | OTHERS | ||||
| {zd0}油泵压力 | Max.Pump pressure | MPa | 16 | ||
| 电机功率 | Pump motor power | kW | 45 | ||
| 电热功率 | Heating power | kW | 29.3 | ||
| 外形尺寸（长*宽*高） | Machine dimension(L×W×H) | m | 7.98×1.90×2.30 | ||
| 油箱容积 | Oiltank cubage | L | 600 | ||
| 机器重量 | Machine weight | t | 16 | ||
