基本规格 Specifications |
单 位Units |
KAL60II系列KAL60IIseries |
使用原料Material |
|
PE.PP.PVC.PA..... |
{zd0}制品容积 Max container capacity |
L |
2 |
模头数Number of die |
set |
1.2.3.4 |
生产能力(空循环Output(Dry Cycle) |
Pc/hr |
900×2 |
机器外形尺寸(长×宽×高)Machine dimension(L×W×H) |
M |
2.8×2.2×2.4 |
机器质量 Total weight |
ton |
4.3 |
开合模系统Clamping unit |
|
|
锁模力Clamping force |
KN |
40 |
模板间距 Platen opening stroke |
mm |
128-368 |
模板尺寸Platen size |
mm |
300×320 |
{zd0}模具尺寸(宽×高)Max mould size(W×H) |
mm |
300×320 |
模具厚度 Mould thickniss |
mm |
153-300 |
动力 Power |
|
|
{zd0}驱动功率 Max drive |
KW |
20.5 |
{zd0}总功率 Total power |
KW |
26 |
螺杆风机功率Fan power for screw |
KW |
0.14×3 |
气源压力 Air pressure |
Mpa |
0.6 |
气源排量 Air consumption |
m³/min |
0.5 |
平均能耗 Average energy consumption |
KW |
15 |
挤出系统 Extruder unit |
|
|
螺杆直径 Screw diameter |
mm |
60 |
螺杆长径比 Screw L/D ratio |
L/D |
24 |
塑化能力 Plasticsing capacity |
Kg/hr |
70 |
螺杆加热段数 Number of heating zone |
zone |
3 |
螺杆加热功率 Extruder heating power |
KW |
6.5 |
挤出电机功率 Extruder driving power |
KW |
15 |
模头 Die-head |
|
|
模头加热段数 Number of heating zone |
Zone |
3 |
模头加热功率 Power of die heating |
KW |
1.8 |
挤出口{zd0}直径 Max die pin diameter |
mm |
100 |
双模头中心距 Center distance of double die |
mm |
130 |
三模头中心距 Center distance of tri-die |
mm |
|
四模头中心距 Center distance of tetra-die |
mm |
60/80 |
+ 基本配置/Basic Equipment
开合模系统 Clamping system |
双平移+高精度线型直线导轨+大梁臂圆柱轴 Double station+High-percision guide+Large arm cylinder axle |
挤出系统 Extruder unit |
硬齿面减速器+变频器 Hard gear box+Inverter |
模头系统 Die system |
特殊钢中心进料挤出模头 Control-incoming die with special steel |
液压系统 Hydraulic system |
全进口液压阀、密封件+电液比列控制 Hydraulic valve,Seal parts and Proportional control |
控制系统 Control system |
进口PLC+进口人机界面+PLC自动温控模块 Import PLC+Human-machine+PLC automatic temperture control model |