SMT Scope 高温观察设备 SK-5000（DC-02）

High Temperature Observation Equipment

SMT Scope SK-5000

This equipment can be observed a changing of the sample state with changing temperature in real time.

Features:

1. Sample Stage

50×50mm

2. Temperature control unit

   2-1. Setting for heating process profile

   We can set it up per 1 sec, 1 degree and 127 steps (0～99M59S/step)

   2-2. Heat up time speed:300℃/min(5℃/sec)MAX

   It can be easily and shortly detected something and by checking reflow profile.

3. Observation unit

   3-1. Magnification: ×20～×520(17inch monitor)

   It can be observed by the most suitable magnification.

   3-2. Resolution:10μm

   3-3. It can change observation position and magnification in heating.

   Thus it can detect and check easily unknown micro-part.

4. Image unit

   4-1. Image quality and time of recording

   It can record less than 40 hours by MPEG-2(140GB/ch)

   4-2. Impose

     1) Temperature in the chamber

     2) Heating time

     3) Measurement

     4) Comment(the above impose can be easily edited)

5. Atmosphere in heating

   5-1. AIR

   5-2. N2 (oxygen density, From a few PPW to atmosphere) But it depends on purity N2.

   5-3. Vacuum (0～13Pa)